Shen Yutu, Mackey Gillian, Rupcich Nicholas, Gloster Darin, Chiuman William, Li Yingfu, Brennan John D
Department of Chemistry, McMaster University, Hamilton, Ontario, Canada, L8S 4M1.
Anal Chem. 2007 May 1;79(9):3494-503. doi: 10.1021/ac070235u. Epub 2007 Mar 23.
Three fluorescence signaling DNA enzymes (deoxyribozymes or DNAzymes) were successfully immobilized within a series of sol-gel-derived matrixes and used for sensing of various metal ions. The DNAzymes are designed such that binding of appropriate metal ions induces the formation of a catalytic site that cleaves a ribonucleotide linkage within a DNA substrate. A fluorophore (fluorescein) and a quencher (DABCYL, [4-(4-dimethylaminophenylazo)benzoic acid]) were placed on the two deoxythymidines flanking the ribonucleotide to allow the generation of fluorescence upon the catalytic cleavage at the RNA linkage. In general, all DNAzymes retained at least partial catalytic function when entrapped in either hydrophilic or hydrophobic silica-based materials, but displayed slower response times and lower overall signal changes relative to solution. Interestingly, it was determined that maximum sensitivity toward metal ions was obtained when DNAzymes were entrapped into composite materials containing approximately 40% of methyltrimethoxysilane (MTMS) and approximately 60% tetramethoxysilane (TMOS). Highly polar materials derived from sodium silicate, diglycerylsilane, or TMOS had relatively low signal enhancements, while materials with very high levels of MTMS showed significant leaching and low signal enhancements. Entrapment into the hybrid silica material also reduced signal interferences that were related to metal-induced quenching; such interferences were a significant problem for solution-based assays and for polar materials. Extension of the solid-phase DNAzyme assay toward a multiplexed assay format for metal detection is demonstrated, and shows that sol-gel technology can provide new opportunities for the development of DNAzyme-based biosensors.
三种荧光信号脱氧核酶(DNA酶)成功固定在一系列溶胶 - 凝胶衍生的基质中,并用于检测各种金属离子。设计这些DNA酶的目的是,使适当金属离子的结合诱导催化位点的形成,该催化位点可切割DNA底物中的核糖核苷酸连接。在核糖核苷酸两侧的两个脱氧胸苷上放置一个荧光团(荧光素)和一个猝灭剂(DABCYL,[4 - (4 - 二甲基氨基苯基偶氮)苯甲酸]),以便在RNA连接处以催化方式切割时产生荧光。一般来说,当包埋在亲水性或疏水性二氧化硅基材料中时,所有DNA酶都至少保留部分催化功能,但相对于溶液,其响应时间较慢,总体信号变化较低。有趣的是,已确定当DNA酶被包埋在含有约40%甲基三甲氧基硅烷(MTMS)和约60%四甲氧基硅烷(TMOS)的复合材料中时,对金属离子具有最大灵敏度。由硅酸钠、二甘油硅烷或TMOS衍生的高极性材料具有相对较低的信号增强,而MTMS含量非常高的材料则显示出明显的浸出和较低的信号增强。包埋在杂化二氧化硅材料中还减少了与金属诱导猝灭相关的信号干扰;这种干扰对于基于溶液的检测和极性材料来说是一个重大问题。展示了将固相DNA酶检测扩展到用于金属检测的多重检测形式,表明溶胶 - 凝胶技术可为基于DNA酶的生物传感器的开发提供新机会。