De Vleeschouwer Kristel, Van der Plancken Iesel, Van Loey Ann, Hendrickx Marc E
Laboratory of Food Technology, Center for Microbial and Food Technology, Faculty of Bioscience Engineering, Katholieke Universiteit Leuven, Kasteelpark Arenberg 22, B-3001 Heverlee, Belgium.
Biotechnol Prog. 2007 May-Jun;23(3):722-8. doi: 10.1021/bp060389f. Epub 2007 May 16.
The influence of water activity on the kinetics of acrylamide formation and elimination reaction was investigated using low-moisture equimolar asparagine-glucose model systems, which were heated at temperatures between 120 and 200 degrees C for variable heating times. To determine the water content corresponding to the water activities tested, a sorption moisture isotherm was constructed experimentally. The acrylamide concentrations measured at different water activities could be modeled on the basis of a reaction scheme including not only acrylamide formation and elimination reactions but also an alternative Maillard reaction between both reactants. The corresponding rate constants and activation energies were estimated using nonlinear regression analysis. Whereas the rate constant for acrylamide formation varied only slightly with the initial water activity of the model system, the elimination rate constant showed a clear minimum around a water activity of 0.82. The opposite trend, namely, a maximum at a water activity of 0.82, was found for the Maillard reaction rate constant as a function of water activity, which confirms data from literature. The activation energies for the different reactions changed in a comparable way as the corresponding rate constant with water activity.
利用低水分等摩尔天冬酰胺 - 葡萄糖模型体系,研究了水分活度对丙烯酰胺生成及消除反应动力学的影响。该模型体系在120至200摄氏度之间加热不同时间。为确定与所测试水分活度对应的含水量,通过实验构建了吸附水分等温线。在不同水分活度下测得的丙烯酰胺浓度可以基于一个反应方案进行建模,该方案不仅包括丙烯酰胺的生成和消除反应,还包括两种反应物之间的另一种美拉德反应。使用非线性回归分析估算了相应的速率常数和活化能。虽然丙烯酰胺生成的速率常数随模型体系的初始水分活度变化不大,但消除速率常数在水分活度约为0.82时出现明显最小值。作为水分活度函数的美拉德反应速率常数呈现相反趋势,即在水分活度为0.82时出现最大值,这证实了文献数据。不同反应的活化能随水分活度的变化方式与相应速率常数类似。