Sun Zongyang, Rafferty Katherine L, Egbert Mark A, Herring Susan W
Department of Oral Biology, University of Washington, Seattle, WA 98195, USA.
Bone. 2007 Aug;41(2):188-96. doi: 10.1016/j.bone.2007.04.183. Epub 2007 Apr 25.
Micromovement at a fracture or distraction osteogenesis (DO) site may play a significant role in bone formation and healing. Mastication is an important physiological process that can cause substantial micromovement at a mandibular disjunction. The purpose of this study is to characterize and quantify the micromovement caused by mastication. Eighteen pigs, divided into three groups based on duration of consolidation, received a unilateral (right) mandibular angle distraction osteogenesis protocol. Differential variable reluctance transducers (DVRTs) and ultrasound crystals were used to measure the change of gap width as well as interfragmentary movement during mastication. Synchronized chewing video and interfragmentary movement recordings were used to determine the magnitude and direction of micromovement at different phases of the chewing cycle. The magnitude of micromovement did not increase significantly with distraction up to almost 5 mm, but did decrease gradually with consolidation. The average micromovement magnitude during the distraction phase was 0.2-0.3 mm, equaling 50,000-250,000 microstrain (muepsilon) on interfragmentary tissue. The dominant deformation pattern was bending in the sagittal plane. The most common direction of bending at the power stroke of chewing was concave dorsally, i.e., superior shortening and inferior lengthening. These findings elucidate how masticatory mechanics affect a mandibular distraction site, and the measurements may be useful for future simulation studies.
骨折部位或牵张成骨(DO)部位的微运动可能在骨形成和愈合中起重要作用。咀嚼是一个重要的生理过程,可在下颌骨连接处引起大量微运动。本研究的目的是描述和量化咀嚼引起的微运动。18只猪根据愈合持续时间分为三组,接受单侧(右侧)下颌角牵张成骨方案。使用差动可变磁阻传感器(DVRT)和超声晶体测量咀嚼过程中的间隙宽度变化以及骨折块间运动。同步咀嚼视频和骨折块间运动记录用于确定咀嚼周期不同阶段微运动的大小和方向。在牵张至近5mm之前,微运动的大小并未随牵张显著增加,但随愈合逐渐减小。牵张期的平均微运动大小为0.2 - 0.3mm,相当于骨折块间组织上50,000 - 250,000微应变(με)。主要的变形模式是矢状面弯曲。咀嚼动力冲程时最常见的弯曲方向是背侧凹陷,即上方缩短和下方延长。这些发现阐明了咀嚼力学如何影响下颌骨牵张部位,这些测量结果可能对未来的模拟研究有用。