Suppr超能文献

晶体结构对正烷基4-羟基苯甲酸酯(对羟基苯甲酸酯)压片性能的影响。

Influence of crystal structure on the tableting properties of n-alkyl 4-hydroxybenzoate esters (parabens).

作者信息

Feng Yushi, Grant David J W, Sun Changquan C

机构信息

Department of Pharmaceutics, University of Minnesota, 308 Harvard Street SE, Minneapolis, MN 55455, USA.

出版信息

J Pharm Sci. 2007 Dec;96(12):3324-33. doi: 10.1002/jps.20981.

Abstract

Certain crystallographic features, such as the existence of slip planes, can greatly facilitate the ability of crystals to deform plastically. An investigation of the relationship between the slip planes and the tableting performance of the crystals of methyl, ethyl, n-propyl, and n-butyl 4-hydroxybenzoate (parabens) was conducted. The absence of slip planes in methyl paraben crystal structure results in significantly poorer tableting performance than the other three parabens. While slip planes are present in the crystal structures of ethyl, propyl, and butyl parabens, they exhibited different plasticity as confirmed by crystal free volume analysis, crystal nano-indentation hardness, and Heckel analysis. Sieved fraction, 150-250 microm, of each paraben powder was compressed into tablets under different conditions. Tablet tensile strength, porosity, and Indices of tableting performance (ITP) were obtained. Under the same compaction pressure, tablet tensile strength was higher for crystals with higher plasticity. Tableting performance, assessed using the ITP, also improved with increasing crystal plasticity. The results confirm that high levels of plasticity, which can result from the presence of slip planes in crystal lattice, plays a critical role in the formation of strong and intact tablets by means of powder compaction.

摘要

某些晶体学特征,如滑移面的存在,能够极大地促进晶体发生塑性变形的能力。开展了一项关于4-羟基苯甲酸甲酯、乙酯、正丙酯和正丁酯(对羟基苯甲酸酯)晶体的滑移面与压片性能之间关系的研究。对羟基苯甲酸甲酯晶体结构中不存在滑移面,这导致其压片性能明显比其他三种对羟基苯甲酸酯差。虽然对羟基苯甲酸乙酯、丙酯和丁酯的晶体结构中存在滑移面,但通过晶体自由体积分析、晶体纳米压痕硬度和赫克尔分析证实,它们表现出不同的可塑性。将每种对羟基苯甲酸酯粉末筛分后的150 - 250微米级分在不同条件下压制成片剂。获得了片剂的抗张强度、孔隙率和压片性能指数(ITP)。在相同的压制压力下,可塑性较高的晶体的片剂抗张强度更高。使用ITP评估的压片性能也随着晶体可塑性的增加而提高。结果证实,晶格中滑移面的存在所导致的高可塑性,在通过粉末压制形成坚固完整片剂的过程中起着关键作用。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验