Masri Maria, Lombardero Germán, Velasquillo Cristina, Martínez Valentín, Neri Rosario, Villegas Hilda, Ibarra Clemente
School of Veterinary Medicine, National Autonomous University of Mexico, Mexico City, Mexico.
Arthroscopy. 2007 Aug;23(8):877-83. doi: 10.1016/j.arthro.2007.05.010.
The goal of this study is to evaluate the efficiency of obtaining a large number of viable cells within a construct that will not be detached by high fluid flow during arthroscopic implantation.
Arthroscopic osteochondral biopsy specimens were obtained from the medial femoral trochlea of 8 horses. Chondrocytes were isolated by collagenase digestion and expanded in M199 media until confluency. After 10 to 12 days, cultures were trypsinized and cells resuspended in culture media. Then, 5 x 10(6) cells x mL(-1) were seeded on a culture dish and the same amount in a flask. Once extracellular matrix was formed, a polyglycolic/polylactic acid disk was placed in the culture dish. Cells obtained from the culture flasks (2 x 10(7) cells) were seeded onto the polymer and encapsulated by lifting the monolayer of cells and matrix from the bottom of the dish with surgical forceps. On days 1, 3, 5, 7, and 9, viability was evaluated by calcein fluorescence. Fiber cell attachment was evaluated before implantation by environmental scanning electron microscopy. Six horses were implanted with naive cell-polymer constructs, and two horses were implanted with adenoviral vector with green fluorescent protein (AdGFP)-transduced cells. Biopsy specimens of repair tissue were evaluated at 8 weeks in 6 horses and at 4 weeks in the 2 horses implanted with AdGFP-transduced cells by second-look arthroscopy and biopsy, histochemistry, and confocal laser scanning microscopy via MitoTracker Red 580 (Invitrogen [Molecular Probes], Gibco, Carlsbad, CA) to assess cell viability.
Viability and attachment of cells to polymer were confirmed by calcein fluorescence microscopy and environmental scanning electron microscopy. Consistency of the construct was ideal for implantation between 7 and 9 days. Repair tissue with AdGFP chondrocytes after 4 weeks showed fluorescent cells also positive to MitoTracker probe by confocal laser scanning microscopy. Repair tissue after 8 weeks showed very cellular new tissue formation with good attachment to subchondral bone and adjacent cartilage.
The matrix-encapsulation cell-seeding technique allowed us to maintain a sufficient number of viable cells within the polymer construct despite the high-pressure fluid flow that occurred during arthroscopic implantation when we used a pump for direct visualization.
Arthroscopic implantation of cell-polymer constructs via a fluid pump can be performed without the risk of cell loss with the use of a simple cell-seeding technique.
本研究的目的是评估在关节镜植入过程中,在一个不会因高流体流量而分离的构建物内获得大量活细胞的效率。
从8匹马的股骨内侧滑车获取关节镜下骨软骨活检标本。通过胶原酶消化分离软骨细胞,并在M199培养基中扩增至汇合。10至12天后,对培养物进行胰蛋白酶消化,细胞重悬于培养基中。然后,将5×10⁶个细胞/mL接种到培养皿中,同样数量接种到培养瓶中。一旦形成细胞外基质,将聚乙醇酸/聚乳酸盘置于培养皿中。从培养瓶中获得的细胞(2×10⁷个细胞)接种到聚合物上,并通过用手术镊子从培养皿底部提起细胞和基质的单层来进行包封。在第1、3、5、7和9天,通过钙黄绿素荧光评估细胞活力。在植入前通过环境扫描电子显微镜评估纤维细胞附着情况。6匹马植入未处理的细胞 - 聚合物构建物,2匹马植入携带绿色荧光蛋白(AdGFP)转导细胞的腺病毒载体。通过二次关节镜检查和活检、组织化学以及使用MitoTracker Red 580(Invitrogen [Molecular Probes],Gibco,加利福尼亚州卡尔斯巴德)的共聚焦激光扫描显微镜在植入AdGFP转导细胞的2匹马中于4周时以及在6匹马中于8周时评估修复组织活检标本,以评估细胞活力。
通过钙黄绿素荧光显微镜和环境扫描电子显微镜证实了细胞在聚合物上的活力和附着情况。构建物的稠度在7至9天之间非常适合植入。4周后,用AdGFP软骨细胞修复的组织通过共聚焦激光扫描显微镜显示荧光细胞对MitoTracker探针也呈阳性。8周后的修复组织显示有非常多细胞的新组织形成,与软骨下骨和相邻软骨附着良好。
基质包封细胞接种技术使我们能够在聚合物构建物内维持足够数量的活细胞,尽管在使用泵进行直接可视化的关节镜植入过程中会出现高压流体流动。
通过流体泵进行细胞 - 聚合物构建物的关节镜植入可以通过使用简单的细胞接种技术来进行,而不会有细胞丢失的风险。