Gefen Amit, Portnoy Sigal, Diamant Idit
Department of Biomedical Engineering, Faculty of Engineering, Tel Aviv University, Tel Aviv 69978, Israel.
Med Eng Phys. 2008 Jun;30(5):624-30. doi: 10.1016/j.medengphy.2007.07.001. Epub 2007 Aug 13.
Little is known about the distributions of mechanical strains and stresses in individual trabeculae of cancellous bone, despite evidence that tissue-level strains affect the metabolism of bone. Recently, micro-finite element (micro-FE) studies have provided the first insights into the mechanical conditions in trabeculae, and suggested that osteoporotic cancellous bone experience higher and substantially less-uniform strains with respect to healthy cancellous bone. We may therefore ask whether the inhomogeneity of bone tissue strains is predominantly a consequence of micro-architectural differences between trabeculae, or is it mostly caused by the curvatures of each individual trabecula. Accordingly, the objectives of the present study were to determine the contribution of the shape of a trabecula to the intra-trabecula strain inhomogeneity, and to determine potential differences in intra-trabecula strain inhomogeneities between normal and thinner, osteoporotic-like trabeculae. We employed our previously reported generic single-trabecula model, which is a mathematical representation of the shape of a trabecula based on statistical analyses of mammalian trabecular dimensions. The single-trabecula model was loaded axially and in bending, and strain distributions were calculated for individual trabeculae as well as for "populations" of trabeculae, formed by assigning different trabecular thickness values in the trabecular model, in order to represent the distributions of trabecular shapes in normal and osteoporotic bones. We found that when subjected to equivalent loads, thinner, osteoporotic-like individual trabeculae and populations of thin trabeculae developed substantially greater strain inhomogeneities compared with normal trabeculae. We conclude that the intra-trabecula strain inhomogeneities are likely to be an important factor contributing to the overall increased strain inhomogeneity in osteoporotic cancellous bone, as previously observed in micro-FE studies.
尽管有证据表明组织水平的应变会影响骨代谢,但关于松质骨单个小梁中机械应变和应力的分布情况,人们了解得还很少。最近,微观有限元(micro-FE)研究首次揭示了小梁中的力学状况,并表明与健康的松质骨相比,骨质疏松性松质骨承受着更高且明显更不均匀的应变。因此,我们可能会问,骨组织应变的不均匀性主要是小梁间微观结构差异的结果,还是主要由每个小梁的曲率引起的。相应地,本研究的目的是确定小梁形状对小梁内应变不均匀性的贡献,并确定正常小梁与更细的、类似骨质疏松的小梁之间小梁内应变不均匀性的潜在差异。我们采用了我们之前报道的通用单小梁模型,该模型是基于对哺乳动物小梁尺寸的统计分析对小梁形状的数学表示。对单小梁模型进行轴向加载和弯曲加载,并计算单个小梁以及通过在小梁模型中赋予不同小梁厚度值形成的小梁“群体”的应变分布,以代表正常骨和骨质疏松骨中小梁形状的分布。我们发现,在承受同等载荷时,与正常小梁相比,更细的、类似骨质疏松的单个小梁以及细小梁群体产生的应变不均匀性要大得多。我们得出结论,小梁内应变不均匀性可能是导致骨质疏松性松质骨中整体应变不均匀性增加的一个重要因素,正如之前在微观有限元研究中所观察到的那样。