Bein Keith J, Wexler Anthony S
Department of Land, Air and Water Resources, University of California, Davis, California 95616, USA.
J Chem Phys. 2007 Sep 28;127(12):124316. doi: 10.1063/1.2768925.
Sulfuric acid-water nucleation is thought to be a key atmospheric mechanism for forming new condensation nuclei. In earlier literature, measurements of sulfuric acid activity were interpreted as the total (monomer plus hydrate) concentration above solution. Due to recent reinterpretations, most literature values for H(2)SO(4) activity are thought to represent the number density of monomers. Based on this reinterpretation, the current work uses the most recent models of H(2)O-H(2)SO(4) binary nucleation along with perturbation analyses to predict a decrease in critical cluster mole fraction, increase in critical cluster diameter, and orders of magnitude decrease in nucleation rate. Nucleation rate parameterizations available in the literature, however, give opposite trends. To resolve these discrepancies, nucleation rates were calculated for both interpretations of H(2)SO(4) activity and directly compared to the available parameterizations as well as the perturbation analysis. Results were in excellent agreement with older parameterizations that assumed H(2)SO(4) activity represents the total concentration and duplicated the predicted trends from the perturbation analysis, but differed by orders of magnitude from more recent parameterizations that assume H(2)SO(4) activity represents only the monomer. Comparison with experimental measurements available in the literature revealed that the calculations of the current work assuming a(a) represents the total concentration are most frequently in agreement with observations.
硫酸 - 水成核被认为是形成新的凝结核的关键大气机制。在早期文献中,硫酸活性的测量值被解释为溶液上方的总(单体加水合物)浓度。由于最近的重新解释,大多数关于H₂SO₄活性的文献值被认为代表单体的数密度。基于这种重新解释,当前的工作使用了最新的H₂O - H₂SO₄二元成核模型以及微扰分析来预测临界团簇摩尔分数的降低、临界团簇直径的增加和成核速率的数量级降低。然而,文献中可用的成核速率参数化给出了相反的趋势。为了解决这些差异,针对H₂SO₄活性的两种解释计算了成核速率,并直接与可用的参数化以及微扰分析进行比较。结果与假设H₂SO₄活性代表总浓度的较旧参数化非常一致,并重现了微扰分析预测的趋势,但与假设H₂SO₄活性仅代表单体的更新的参数化相差几个数量级。与文献中可用的实验测量结果比较表明,当前工作中假设a(a)代表总浓度的计算结果最常与观测结果一致。