Jiang Ju-Hui, Li Ya-Hong, Cai Wei-Min
School of Environmental Science and Engineering, Shanghai Jiaotong University, Shanghai, China.
J Hazard Mater. 2008 May 1;153(1-2):508-13. doi: 10.1016/j.jhazmat.2007.08.083. Epub 2007 Sep 1.
Sulfur dioxide can be effectively removed by cast iron scraps corrosion process in a DC magnetically fixed bed, and iron sulfate compounds are gained as an available byproduct. At approximate 50 degrees C, when magnetic field intensity was at 15 mT and height of scraps was about 25 mm, the SO(2) removal efficiency can be kept above 80%. As the deposited rusts accumulated, the corrosion rate and desulfurization efficiency gradually decreased. The results show SO(2) removal efficiency depends on corrosion rate, and it can be obviously enhanced by DC magnetic field. With the XRD and SEM research, it can be found that DC magnetic field cannot change the crystal structure of rusts, but can make the surface morphologies on the surface of scraps looser which means easily to be removed. Consequently, the corrosion resistance can be lessened and SO(2) removal efficiency is improved significantly.
在直流磁固定床中,铸铁屑腐蚀过程可有效去除二氧化硫,并获得硫酸铁化合物作为可用副产品。在约50摄氏度时,当磁场强度为15毫特斯拉且屑的高度约为25毫米时,二氧化硫去除效率可保持在80%以上。随着沉积铁锈的积累,腐蚀速率和脱硫效率逐渐降低。结果表明,二氧化硫去除效率取决于腐蚀速率,直流磁场可显著提高该效率。通过X射线衍射和扫描电子显微镜研究发现,直流磁场不会改变铁锈的晶体结构,但会使屑表面的形貌变得更疏松,这意味着更容易被去除。因此,耐腐蚀性降低,二氧化硫去除效率显著提高。