Subbottom profiling using a ship towed line array and geoacoustic inversion.

Bottom profiling traditionally uses broadband signals received on a line array at long ranges to estimate the bottom layer structure and thickness. In this paper, a subbottom profiling method is developed and applied to a ship-towed line array using the same ship towed source to estimate the subbottom layer structure and thickness. A ship towed line-array system can be used to estimate bottom properties using geoacoustic inversion and can cover a wide area in a short time. It needs some prior information about the subbottom structure and layer thickness, without which the solution can be ambiguous and even erratic when resolving parameters over a wide area. It is shown that the required subbottom information can be obtained from the time-angle relation by beamforming the same acoustic signal data used for geoacoustic inversion. The time-angle analysis is used to expose the prevalent physics intrinsic to geoacoustic inversion. One finds that the tau-p relation of the bottom and the bottom reflection coefficients, sampled at discrete angles associated with bottom and multiple surface-bottom returns, are often adequate, for many practical applications, to uniquely determine the geoacoustic bottom at low (< or =1 kHz) frequencies.