Satterfield M Barclay, Benziger J B
Department of Chemical Engineering, Princeton University, Princeton, New Jersey 08544, USA.
J Phys Chem B. 2008 Mar 27;112(12):3693-704. doi: 10.1021/jp7103243. Epub 2008 Mar 4.
Dynamics of water absorption from a saturated vapor and water desorption into dry air for Nafion 1100 EW ionomers have been measured for film thicknesses between 51 and 606 microm and at temperatures ranging from 30 to 90 degrees C. Water absorption and desorption exhibit two distinct non-Fickian characteristics: (1) desorption is 10 times faster than absorption and (2) the normalized mass change does not collapse to a single master curve when plotted against time normalized by membrane thickness squared, t/l2, for either absorption or desorption. Water desorption data were fit well by a model in which diffusion is rapid and interfacial mass transport resistance is the rate-limiting process for water loss. Water absorption is described by a two-stage process. At early times, interfacial mass transport controls water absorption, and at longer times, water absorption is controlled by the dynamics of polymer swelling and relaxation.
已对膜厚在51至606微米之间且温度范围为30至90摄氏度的Nafion 1100 EW离聚物,测量了其从饱和蒸汽中吸水以及向干燥空气中解吸水的动力学过程。吸水和解吸水呈现出两种不同的非菲克特性:(1)解吸速度比吸收速度快10倍;(2)当以膜厚平方归一化时间t/l²对吸收或解吸进行作图时,归一化质量变化不会汇聚到单一的主曲线上。水的解吸数据通过一个模型得到了很好的拟合,在该模型中扩散迅速,界面传质阻力是水分损失的限速过程。吸水过程由一个两阶段过程描述。在早期,界面传质控制吸水,而在较长时间后,吸水由聚合物溶胀和松弛的动力学过程控制。