Suppr超能文献

将晶体胶体阵列进行光流体封装至球形膜中。

Optofluidic encapsulation of crystalline colloidal arrays into spherical membrane.

作者信息

Kim Shin-Hyun, Jeon Seog-Jin, Yang Seung-Man

机构信息

National Creative Research Initiative Center for Integrated Optofluidic Systems and Department of Chemical and Biomolecular Engineering, Korea Advanced Institute of Science and Technology, Daejeon, 305-701 Korea.

出版信息

J Am Chem Soc. 2008 May 7;130(18):6040-6. doi: 10.1021/ja800844w. Epub 2008 Apr 8.

Abstract

Double emulsion droplets encapsulating crystalline colloidal arrays (CCAs) with a narrow size distribution were produced using an optofluidic device. The shell phase of the double emulsion was a photocurable resin that was photopolymerized downstream of the fluidic channel within 1 s after drop generation. The present optofluidic synthesis scheme was very effective for fabricating highly monodisperse spherical CCAs that were made structurally stable by in situ photopolymerization of the encapsulating shells. The shell thickness and the number of core emulsion drops could be controlled by varying the flow rates of the three coflowing streams in the dripping regime. The spherical CCAs confined in the shell exhibited distinct diffraction patterns in the visible range, in contrast to conventional film-type CCAs. As a result of their structure, the spherical CCAs exhibited photonic band gaps for normal incident light independent of the position on the spherical surface. This property was induced by heterogeneous nucleation at the smooth wall of the spherical emulsion drop during crystallization into a face-centered cubic (fcc) structure. On the other hand, the solidified shells did not permit the penetration of ionic species, enabling the CCAs to maintain their structure in a continuous aqueous phase of high ionic strength for at least 1 month. In addition, the evaporation of water molecules inside the shell was slowed considerably when the core-shell microparticles were exposed to air: It took approximately 6 h for a suspension encapsulated in a thick shell to evaporate completely, which is approximately 1000 times longer than the evaporation time for water droplets with the same volume. Finally, the spherical CCAs additionally exhibited enhanced stability against external electric fields. The spherical geometry and high dielectric constant of the suspension contributed to reducing the electric field inside the shell, thereby inhibiting the electrophoretic movement of the charged particles.

摘要

利用光流体装置制备了包裹着尺寸分布窄的晶体胶体阵列(CCA)的双乳液滴。双乳液的壳层是一种光固化树脂,在液滴生成后1秒内在流体通道下游进行光聚合。目前的光流体合成方案对于制造高度单分散的球形CCA非常有效,这些CCA通过封装壳的原位光聚合而在结构上变得稳定。壳层厚度和核心乳液滴的数量可以通过改变滴流模式下三种共流的流速来控制。与传统的薄膜型CCA相比,限制在壳层内的球形CCA在可见光范围内呈现出明显的衍射图案。由于其结构,球形CCA对于垂直入射光呈现光子带隙,且与球面上的位置无关。这种特性是在结晶成面心立方(fcc)结构过程中,在球形乳液滴的光滑壁上通过异质成核诱导产生的。另一方面,固化的壳层不允许离子物种渗透,使得CCA能够在高离子强度的连续水相中至少保持其结构1个月。此外,当核壳微粒暴露在空气中时,壳层内水分子的蒸发速度大大减慢:封装在厚壳中的悬浮液完全蒸发大约需要6小时,这比相同体积水滴的蒸发时间长约1000倍。最后,球形CCA还表现出对外部电场增强的稳定性。悬浮液的球形几何形状和高介电常数有助于降低壳层内的电场,从而抑制带电粒子的电泳运动。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验