Joshi J M, Pathak P N, Pandey A K, Manchanda V K
Chemical Engineering Division, Bhabha Atomic Research Centre, Trombay, Mumbai 400 085, India.
Talanta. 2008 Jun 30;76(1):60-5. doi: 10.1016/j.talanta.2008.02.003. Epub 2008 Feb 15.
A colorimetric method for simultaneous preconcentration and determination of uranium(VI) anions from aqueous samples was developed using a membrane optode formed by physical inclusion of a chromophore 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol (Br-PADAP) into a plasticized cellulose triacetate matrix. The optode was tested for uranium uptake in bicarbonate/carbonate medium (approximately 10(-4) M) at pH 7-8 in the presence of triethanolamine buffer. The inclusion of an anion-exchanger tricaprylylmethyl ammonium chloride (Aliquat-336) was found to be necessary for the formation of U(VI)-Br-PADAP complex in the optode matrix, resulting into distinct color change of the optode from yellow to magenta after uranium sorption. The composition of the optode was optimized by varying the amounts of different plasticizers and Aliquat-336 to obtain minimum response time towards U(VI) in aqueous bicarbonate medium. The proportionality in intensity of the magenta color of the optode samples loaded with varying amounts of U(VI) suggested its potential applications for screening of U(VI) in aqueous samples by visual colorimetry. The effects of experimental parameters involved in the detection and quantification of U(VI) using optode were optimized. The optode analytical performance was evaluated in terms of interference of cations and anions, equilibration time, reusability, detection limit, etc. and compared with the conventional spectrophotometric method for U(VI) using same chromophore Br-PADAP. The optode developed in the present work was tested in real alkaline Mg(NO(3))(2) effluent sample obtained from uranium extraction process.
开发了一种比色法,用于同时预富集和测定水样中的铀(VI)阴离子。该方法使用一种膜光极,通过将发色团2-(5-溴-2-吡啶偶氮)-5-二乙氨基苯酚(Br-PADAP)物理包埋在增塑的三醋酸纤维素基质中形成。在三乙醇胺缓冲液存在下,于pH 7-8的碳酸氢盐/碳酸盐介质(约10^(-4) M)中测试该光极对铀的吸收。发现加入阴离子交换剂三辛基甲基氯化铵(Aliquat-336)对于在光极基质中形成U(VI)-Br-PADAP络合物是必要的,这导致铀吸附后光极颜色从黄色明显变为品红色。通过改变不同增塑剂和Aliquat-336的用量来优化光极的组成,以在碳酸氢盐水溶液介质中获得对U(VI)的最短响应时间。装载不同量U(VI)的光极样品品红色强度的比例关系表明其在通过目视比色法筛选水样中U(VI)方面的潜在应用。优化了使用光极检测和定量U(VI)所涉及的实验参数。从阳离子和阴离子的干扰、平衡时间、可重复使用性、检测限等方面评估了光极的分析性能,并与使用相同发色团Br-PADAP的传统分光光度法测定U(VI)进行了比较。将本工作中开发的光极用于从铀提取过程中获得的实际碱性硝酸镁(Mg(NO₃)₂)废水样品中进行测试。