Suppr超能文献

搅拌式生物反应器中的流体力学力降低了 HL60 细胞表面的 CD13 和 CD33 蛋白含量。

Fluid-mechanical forces in agitated bioreactors reduce the CD13 and CD33 surface protein content of HL60 cells.

机构信息

Department of Chemical Engineering, Northwestern University, Evanston, Illinois 60208-3120, USA.

出版信息

Biotechnol Bioeng. 1993 Apr 15;41(9):868-77. doi: 10.1002/bit.260410906.

Abstract

Flow cytometry was used to examine the effect of hydrodynamic forces in surface aerated stirred tank bioreactors on the quantity of CD13 and CD33 surface proteins of Hl60 (human promyelocytic leukemia) cells. A step increase in agitation of the 2-L bioreactors from 80 to 400 rpm reduced the apparent growth rate and the average CD13 and CD33 content per HL60 cell. The effects on the two surface proteins were observed within 30-60 min following the increase in the agitation and preceded observed effects on cell growth by at least 10 h. Upon reduction of the agitation rate back to 80 rpm, the CD13 and CD33 content recovered (in ca. 10 h) for CD13 and ca. 29h for (CD33) to the levels of the control culture whose agitation rate was maintained at 80rpm. The CD13 and CD33 cell content was reduced even at agitation rates (270 rpm) that did not affect cell proliferation. Pluronic F68 (a commonly used shear protectant) had a protective effect on the CD33 content per cell of cultures subjected to hydrodynamic injury but no effect on the CD13 cell content. Possible bioprocessing and physiological implications of these findings are discussed.

摘要

流式细胞术用于检查表面曝气搅拌罐生物反应器中的流体动力对 HL60(人早幼粒细胞白血病)细胞表面 CD13 和 CD33 蛋白数量的影响。将 2-L 生物反应器的搅拌从 80rpm 增加到 400rpm,会降低表观生长速率和每个 HL60 细胞的平均 CD13 和 CD33 含量。在增加搅拌后 30-60 分钟内观察到对这两种表面蛋白的影响,至少比观察到对细胞生长的影响早 10 小时。当搅拌速率降低回 80rpm 时,CD13 和 CD33 的含量(在大约 10 小时内恢复)对于 CD13 和(CD33)大约 29 小时恢复到控制培养物的水平,其搅拌速率保持在 80rpm。即使在不影响细胞增殖的搅拌速率(270rpm)下,细胞内 CD13 和 CD33 的含量也会降低。普朗尼克 F68(一种常用的剪切保护剂)对经受流体动力损伤的培养物中每个细胞的 CD33 含量具有保护作用,但对 CD13 细胞含量没有影响。讨论了这些发现的可能的生物加工和生理意义。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验