Suppr超能文献

用于光学相干断层扫描成像的高功率波长线性扫频锁模光纤激光器。

High power wavelength linearly swept mode locked fiber laser for OCT imaging.

作者信息

Liu George Y, Mariampillai Adrian, Standish Beau A, Munce Nigel R, Gu Xijia, Vitkin I Alex

机构信息

Dept Medical Biophysics, University of Toronto, 610 University Ave, Toronto, Ontario, Canada.

出版信息

Opt Express. 2008 Sep 1;16(18):14095-105. doi: 10.1364/oe.16.014095.

Abstract

We report a long coherence length, high power, and wide tuning range wavelength linearly swept fiber mode-locked laser based on polygon scanning filters. An output power of 52.6 mW with 112 nm wavelength tuning range at 62.6 kHz sweeping rate has been achieved. The coherence length is long enough to enable imaging over 8.1 mm depth when the sensitivity decreases by 8.7 dB (1/e(2)). The Fourier components are still distinguishable when the ranging depth exceeds 15 mm, which corresponds to 30 mm optical path difference in air. The parameters that are critical to OCT imaging quality such as polygon filter linewidth, the laser coherence length, output power, axial resolution and the Fourier sensitivity have been investigated theoretically and experimentally. Since the wavelength is swept linearly with time, an analytical approach has been developed for transforming the interference signal from equidistant spacing in wavelength to equidistant spacing in frequency. Axial resolution of 7.9 microm in air has been achieved experimentally that approaches the theoretical limit.

摘要

我们报道了一种基于多边形扫描滤波器的长相干长度、高功率且宽调谐范围的波长线性扫频光纤锁模激光器。在62.6 kHz的扫频速率下,实现了52.6 mW的输出功率以及112 nm的波长调谐范围。当灵敏度降低8.7 dB(1/e(2))时,相干长度足够长,能够对8.1 mm深度进行成像。当测距深度超过15 mm(相当于空气中30 mm的光程差)时,傅里叶分量仍然可分辨。从理论和实验上研究了对光学相干断层扫描(OCT)成像质量至关重要的参数,如多边形滤波器线宽、激光相干长度、输出功率、轴向分辨率和傅里叶灵敏度。由于波长随时间线性扫频,已开发出一种解析方法,用于将干涉信号从波长上的等间距转换为频率上的等间距。实验上实现了空气中7.9微米的轴向分辨率,接近理论极限。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验