Bermúdez-Aguirre D, Mawson R, Barbosa-Cánovas G V
Center for Nonthermal Processing of Food, Washington State Univ, Pullman, WA 99164, USA.
J Food Sci. 2008 Sep;73(7):E325-32. doi: 10.1111/j.1750-3841.2008.00875.x. Epub 2008 Aug 18.
The structure of fat globules in whole milk was studied after heat and thermosonication treatments to observe what happens during these processes at the microscopic level using scanning electron microscopy. Raw whole milk was thermosonicated in an ultrasonic processor-Hielscher UP400S (400 W, 24 kHz, 120 microm amplitude), using a 22-mm probe at 63 degrees C for 30 min. Heat treatment involved heating the milk at 63 degrees C for 30 min. Color and fat content were measured to correlate the images with analytical measurements. The results showed that the surface of the fat globule was completely roughened after thermosonication. Ultrasound waves were responsible for disintegrating the milk fat globule membrane (MFGM) by releasing the triacylglycerols. Furthermore, the overall structure of milk after sonication showed smaller fat globules (smaller than 1 microm) and a granular surface. This was due to the interaction between the disrupted MFGM and some casein micelles. Minor changes in the aspect of the globules between thermal and raw milks were detected. Color measurements showed higher L* values for sonicated samples. Sonicated milk was whiter (92.37 +/- 0.20) and generally showed a better degree of luminosity and homogenization compared to thermal treated milk (88.25 +/- 0.67) and raw milk (87.82 +/- 0.18). Fat content analysis yielded a higher value after sonication (4.24%) compared to untreated raw milk (4.04%) because fat extraction is more efficient after sonication. The advantages of thermosonicated milk are that it can be pasteurized and homogenized in just 1 step, it can be produced with important cost savings, and it has better characteristics, making thermosonication a potential processing method for milk and most other dairy products.
采用扫描电子显微镜研究了全脂牛奶经加热和热超声处理后脂肪球的结构,以观察在微观层面这些过程中会发生什么。将原料全脂牛奶在超声处理器-Hielscher UP400S(400 W,24 kHz,120微米振幅)中进行热超声处理,使用22毫米探头,在63℃下处理30分钟。热处理是将牛奶在63℃下加热30分钟。测量颜色和脂肪含量,以便将图像与分析测量结果相关联。结果表明,热超声处理后脂肪球表面完全变得粗糙。超声波通过释放三酰甘油使乳脂肪球膜(MFGM)解体。此外,超声处理后牛奶的整体结构显示出更小的脂肪球(小于1微米)和颗粒状表面。这是由于受损的MFGM与一些酪蛋白胶粒之间的相互作用。检测到热牛奶和原料牛奶中脂肪球外观的微小变化。颜色测量显示,超声处理样品的L*值更高。与热处理牛奶(88.25±0.67)和原料牛奶(87.82±0.18)相比,超声处理的牛奶更白(92.37±0.20),总体上显示出更好的亮度和均质化程度。与未处理的原料牛奶(4.04%)相比,超声处理后脂肪含量分析得出的值更高(4.24%),因为超声处理后脂肪提取更有效。热超声处理牛奶的优点在于它可以在一个步骤中进行巴氏杀菌和均质化,可以显著节省生产成本,并且具有更好的特性,这使得热超声处理成为牛奶和大多数其他乳制品的一种潜在加工方法。