Suppr超能文献

用于通过激光烧蚀电感耦合等离子体质谱法分析玻璃碎片的采样策略 第二部分:样本大小和样本形状考量

Sampling strategies for the analysis of glass fragments by LA-ICP-MS Part II: Sample size and sample shape considerations.

作者信息

Trejos Tatiana, Almirall José R

机构信息

International Forensic Research Institute and Department of Chemistry, Florida International University, University Park, Miami, FL 33199, USA.

出版信息

Talanta. 2005 Aug 15;67(2):396-401. doi: 10.1016/j.talanta.2005.01.033. Epub 2005 Feb 26.

Abstract

Glass fragments recovered from crime scenes are usually very small and therefore the amount of sample available to conduct forensic analyses is limited. Elemental analysis using conventional digestion methods consumes at least 2-3mg of glass per replicate. LA-ICP-MS requires 10,000 times less glass consumption per analysis ( approximately 280ng), and therefore the sample remains practically unaltered. Typically, the recovered fragments (unknowns) are 0.1-1mm in length, while the "known" samples are usually larger, i.e. a broken fragment from a windshield (>3mm). For bulk digestion analysis, the difference in fragment size does not present a problem for elemental comparisons - other than requiring at least 6mg for triplicate analysis - because the sample is crushed and homogenized before weighing. Laser ablation sampling results in the creation of small craters ( approximately 50mum diameter and 80mum deep) drilled into the sample due to the interaction of the laser with the glass target. This study aims to evaluate whether the quantitative elemental analysis using the LA sampling method is affected by the size of the glass fragment due to differences in heat dissipation and surface-laser interaction. The analytical method employed for the analysis of glass by LA-ICP-MS had previously shown to possess the same or better performance than dissolution ICP-MS methods in terms of accuracy, precision, limits of detection and discrimination power. A 266nm Nd:YAG laser with a flat top beam profile was used in single point mode sampling a 50mum spot size for 50s at 10Hz. Standard glass reference materials SRM 612 and SRM 610 were selected to conduct this work in order to account for different concentration ranges and different opacities of the samples. The set under study was comprised of seven fragments originating from each standard at different sizes and shapes ranging from 6 to 0.2mm length. Analysis of variance (ANOVA) followed by the Tukey's honestly significant different test (HSD) was used for data analysis. The results show that there is no significant difference in the elemental composition of different sized fragments. The conclusions, however, cannot be generalized for fragments measuring less than 0.2mmx0.1mm.

摘要

从犯罪现场找到的玻璃碎片通常非常小,因此可用于法医分析的样本量有限。使用传统消解方法进行元素分析,每次重复分析至少需要消耗2 - 3毫克玻璃。激光烧蚀电感耦合等离子体质谱法(LA - ICP - MS)每次分析所需的玻璃消耗量要少10000倍(约280纳克),因此样本实际上没有变化。通常,找到的碎片(未知样本)长度为0.1 - 1毫米,而“已知”样本通常更大,例如挡风玻璃的破碎碎片(大于3毫米)。对于批量消解分析,碎片大小的差异对于元素比较来说不是问题——除了三次重复分析至少需要6毫克样本外——因为样本在称重前会被碾碎并均质化。激光烧蚀采样会由于激光与玻璃靶材的相互作用在样本上形成小坑(直径约50微米,深80微米)。本研究旨在评估由于散热和表面激光相互作用的差异,使用激光烧蚀采样方法进行定量元素分析是否会受到玻璃碎片大小的影响。此前已证明,采用LA - ICP - MS分析玻璃的分析方法在准确性、精密度、检测限和鉴别能力方面与溶解ICP - MS方法具有相同或更好的性能。使用具有平顶光束轮廓的266纳米钕钇铝石榴石激光,以单点模式在10赫兹频率下对50微米的光斑大小采样50秒。选择标准玻璃参考物质SRM 612和SRM 610来开展这项工作,以考虑样本的不同浓度范围和不同不透明度。所研究的样本组由来自每个标准物质的七个不同大小和形状的碎片组成,长度范围从6毫米到0.2毫米。数据分析采用方差分析(ANOVA),随后进行Tukey真实显著差异检验(HSD)。结果表明,不同大小碎片的元素组成没有显著差异。然而,对于尺寸小于0.2毫米×0.1毫米的碎片,该结论不能一概而论。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验