Betker Aimee L, Moussavi Zahra M K, Szturm Tony
Department of Electrical and Computer Engineering, University of Manitoba, Winnipeg, MB R3T 5V6, Canada.
IEEE Trans Biomed Eng. 2008 Nov;55(11):2491-8. doi: 10.1109/TBME.2008.2001127.
The center of body mass (COM), center of foot pressure (COP), and body segment acceleration signals are commonly used to indicate movement performance and stability during standing activities and walking. For balance maintenance and restoration, the human brain is capable of estimating and predicting the COM even in the absence of visual or vestibular information. Thus, we hypothesized that the COM may be acquired through the processing of proprioceptive somatosensory information, represented by body segment accelerations, and an external spatial reference, the ground support, represented by the COP. To investigate this hypothesis, we modeled the relationships that exist between the COP and accelerometer data with the 3-D COM trajectory, during walking on firm and irregular surfaces. The models accounted for 99.85 +/- 0.20% and 99.77 +/- 0.39% of the resultant COM trajectory's variability for the firm and irregular surfaces, respectively. This corresponded to a percentage error between the estimated and actual resultant COM of 16.06 +/- 11.11% for the firm surface and 21.41 +/- 12.70% for the doweling surface. In turn, this translates into an absolute error between the true and actual resultant COM of 3.62 +/- 2.69 cm and 4.74 +/- 3.01 cm for the firm and doweling surfaces, respectively. The model is novel in that it does not require any calibration and provides a reasonably accurate estimation of the COM, which can be compared to the brain's balance performance. Hence, this model could be used instead of the cumbersome method of video motion analysis for COM calculation.
身体质量中心(COM)、足底压力中心(COP)和身体节段加速度信号通常用于指示站立活动和行走过程中的运动表现和稳定性。为了维持和恢复平衡,即使在没有视觉或前庭信息的情况下,人类大脑也能够估计和预测COM。因此,我们假设COM可能是通过处理由身体节段加速度表示的本体感觉躯体感觉信息以及由COP表示的外部空间参考(地面支撑)来获取的。为了研究这一假设,我们对在坚实和不规则表面上行走时COP与加速度计数据之间存在的关系以及三维COM轨迹进行了建模。这些模型分别解释了坚实表面和不规则表面上所得COM轨迹变异性的99.85±0.20%和99.77±0.39%。这对应于坚实表面上估计的和实际所得COM之间的百分比误差为16.06±11.11%,榫接表面上为21.41±12.70%。相应地,这转化为坚实表面和榫接表面上真实和实际所得COM之间的绝对误差分别为3.62±2.69厘米和4.74±3.01厘米。该模型的新颖之处在于它不需要任何校准,并且能够对COM进行合理准确的估计,这可以与大脑的平衡表现进行比较。因此,该模型可以替代用于COM计算的繁琐的视频运动分析方法。