Knee Surgery Department, centre Livet, Albert Trillat Center, North Hospitals Group, 8, rue de Margnolles, 69300 Caluire, France.
Orthop Traumatol Surg Res. 2009 Feb;95(1):12-21. doi: 10.1016/j.otsr.2008.04.001. Epub 2009 Feb 4.
Unicompartimental knee arthroplasty outcome is sometimes compared to total knee arthroplasty but various implant parameters might greatly influence this outcome. The objectives of this study were to report the results of a consecutive series of 172 all-polyethylene unicompartmental knee arthroplasties (UKAs) and to detail possible factors of success and failure.
It is possible to outline implant and technique factors determining success or failure in unicompartimental knee arthroplasty.
One hundred seventy-two HLS-type cemented resurfacing UKAs, with the femoral implant made of chrome-cobalt and the tibial implant tibial entirely in polyethylene (without anchorage studs) were consecutively implanted between 1988 and 2004 in 134 patients (111 females and 23 males) in our center according to the indications established in 1988, using the same technique for each surgery. The patients' mean age was 72.2 years (range, 25-90 years). The review rate was 83.7% (144 UKAs), with a mean follow-up of 62.3 months (range, 24-160 months). The series included 84 medial UKAs and 60 lateral UKAs. The clinical data were analyzed using the IKS criteria and the patients had a complete radiological evaluation before surgery and at the last follow-up.
The rate of satisfied or very satisfied patients was 97.2%. No pain or slight pain was found in 81% of the cases. The mean flexion was 133 degrees (range, 85-150 degrees). The mean knee score varied from 63.6 before surgery to 91.5 (90.4 for medial UKAs and 92.9 for lateral UKAs) and the function score from 63.6 to 83.8 (84.7 for medial UKAs and 82.6 for lateral UKAs). The mean range of motion was 133 degrees (range, 85-150 degrees), better than the medial UKAs for osteonecrosis. The mean residual deformity was 4 degrees varus for the medial UKAs and 2 degrees valgus for the lateral UKAs. A radiolucency was found in 23% of the cases (20% tibial and 3% femoral), nonprogressive in all cases. In 87.2% of the cases, the opposite femorotibial compartment remained radiologically normal. No progression to osteoarthritis in the femoropatellar joint required additional surgery. Sixteen patients required revision surgery: in six cases, the implant was removed and a total prosthesis implanted (one late infection, one case of involvement of the opposite compartment, and four cases of tibial component loosening). In the other cases, one tibial baseplate was changed, five arthroscopies were done, and four unicompartmental knee replacements were done on the opposite compartment. The Kaplan-Meier survival rate (taking into account the revisions with implant change) was 95.6. The results of this series were very satisfactory and were similar to recent series in the world literature that showed survival rates between 90 and 98% at 10 years, rates that are equivalent to those found for total knee replacements. The mean flexion range of motion found was higher than the majority of other recent series, probably because of the precise patient selection in the present study, a minimally invasive approach, and the femoral implant design with an ascending condylar posterior cut. The deterioration of the contralateral compartment is frequently reported, but was perhaps prevented by the absence of overcorrection and patient selection. In this series, none of the UKAs was revised for wear. We explain this by the systematic preservation of a moderate undercorrection, particularly for medial UKAs, the quality of the polyethylene, and a selection based on patient weight and age.
The option of an all-polyethylene tibial implant, with minimal bone cuts (femoral resurfacing), makes excellent long-term results possible.
单髁膝关节置换术的结果有时与全膝关节置换术进行比较,但各种植入物参数可能会极大地影响这一结果。本研究的目的是报告连续 172 例全聚乙烯单髁膝关节置换术(UKA)的结果,并详细说明成功和失败的可能因素。
有可能确定影响单髁膝关节置换术成功或失败的植入物和技术因素。
1988 年至 2004 年期间,我们中心连续植入了 134 名患者(111 名女性和 23 名男性)的 172 例 HLS 型水泥固定翻修型 UKA,股骨植入物由铬钴制成,胫骨植入物完全由聚乙烯制成(无锚固钉),使用相同的技术进行每个手术。患者的平均年龄为 72.2 岁(范围,25-90 岁)。回顾率为 83.7%(144 例 UKA),平均随访时间为 62.3 个月(范围,24-160 个月)。该系列包括 84 例内侧 UKA 和 60 例外侧 UKA。临床数据采用 IKS 标准进行分析,患者在术前和最后一次随访时均进行了完整的影像学评估。
满意或非常满意的患者比例为 97.2%。81%的病例无疼痛或轻微疼痛。平均屈曲度为 133 度(范围,85-150 度)。平均膝关节评分从术前的 63.6 分变化至 91.5 分(内侧 UKA 为 90.4,外侧 UKA 为 92.9),功能评分从术前的 63.6 分变化至 83.8 分(内侧 UKA 为 84.7,外侧 UKA 为 82.6)。平均活动范围为 133 度(范围,85-150 度),优于骨坏死的内侧 UKA。平均残余畸形为内侧 UKA 4 度内翻,外侧 UKA 2 度外翻。23%的病例发现放射透亮区(20%胫骨,3%股骨),所有病例均无进展。87.2%的病例对侧股骨胫骨间室在影像学上仍正常。股髌关节无进展性骨关节炎需要额外手术。16 名患者需要进行翻修手术:6 例患者切除植入物并植入全假体(1 例迟发性感染,1 例对侧间室受累,4 例胫骨组件松动)。在其他情况下,1 例更换了胫骨基板,进行了 5 次关节镜检查,对侧间室进行了 4 次单髁膝关节置换术。考虑到植入物更换的修订版,Kaplan-Meier 生存率为 95.6。本系列结果非常满意,与世界文献中的近期系列结果相似,10 年生存率为 90%-98%,与全膝关节置换术相当。所发现的平均屈曲运动范围高于大多数其他近期系列,可能是由于本研究中对患者进行了精确的选择、微创方法以及具有上升髁后切的股骨植入物设计。对对侧间室的恶化经常被报道,但通过避免过度矫正和患者选择可能得到预防。在本系列中,没有任何 UKA 因磨损而进行翻修。我们解释说,这是由于系统地保留了适度的矫正不足,特别是对于内侧 UKA,聚乙烯的质量以及基于患者体重和年龄的选择。
采用最小化骨切(股骨表面置换)的全聚乙烯胫骨植入物可获得出色的长期结果。