Adhikari P, Shin J-A, Lee J-H, Hu J-N, Hwang K T, Lee K-T
Dept of Food Science and Technology, Chungnam Natl Univ, Daejeon, South Korea.
J Food Sci. 2009 Mar;74(2):E87-96. doi: 10.1111/j.1750-3841.2009.01052.x.
Rice bran oil (RBO) was fractionated into 2 phases, solid (S-RBO) and liquid (L-RBO), using acetone at -18 degrees C and the weight yield of each S-RBO and L-RBO was 45.5% and 54.5%, respectively. Then, trans-free hard fat was synthesized from trans-free substrate of S-RBO and fully hydrogenated soybean oil (FHSBO) at different molar ratios (S-RBO : FHSBO; 1 : 1, 1 : 1.5, 1 : 2, and 1 : 3) with Lipozyme TL IM lipase (10% of total substrate). Conjugated linoleic acid (CLA, 20% of total substrate) was used as functional fatty acids for the production of trans-free hard fat. After fatty acid analysis, CLA (12.2% to 14.2%) was found on the triacylglycerol (TAG) backbone of the interesterified products along with stearic (37.6% to 49%), palmitic (15% to 17.9%), and oleic acids (13.3% to 19.2%). The interesterified product contained higher level of saturated fatty acid (62.6% to 70.1%) at sn-2 position. Total tocopherols (alpha-, gamma-, and delta-; 1.4 to 2.6 mg/100 g) and phytosterols (campesterol, stigmasterol, and beta-sitosterol; 220.5 to 362.7 mg/100 g) were found in the interesterified products. From DSC results, solid fat contents of the interesterified products (S-RBO : FHSBO 1 : 1, 1 : 1.5, 1 : 2, and 1 : 3) at 25 degrees C were 23.1%, 27%, 30.1%, and 44.9%. The interesterified products consisted mostly of beta' form crystal with a small portion of beta form. The interesterified product (S-RBO : FHSBO 1 : 1.5) was softer than the physical blend but slightly harder than commercial shortenings as measured by texture analyzer. Thus, trans-free hard fat stock, which may have a potential functionality could be produced with various physical properties.
米糠油(RBO)在-18℃下用丙酮进行分馏,分为固相(S-RBO)和液相(L-RBO)两个相,S-RBO和L-RBO的重量产率分别为45.5%和54.5%。然后,以S-RBO的无反式底物和全氢化大豆油(FHSBO)为原料,在不同摩尔比(S-RBO:FHSBO;1:1、1:1.5、1:2和1:3)下,使用Lipozyme TL IM脂肪酶(占总底物的10%)合成无反式硬脂。共轭亚油酸(CLA,占总底物的20%)用作生产无反式硬脂的功能性脂肪酸。脂肪酸分析后发现,酯交换产物的甘油三酯(TAG)主链上含有CLA(12.2%至14.2%),同时还有硬脂酸(37.6%至49%)、棕榈酸(15%至17.9%)和油酸(13.3%至19.2%)。酯交换产物在sn-2位含有较高水平的饱和脂肪酸(62.6%至70.1%)。酯交换产物中发现了总生育酚(α-、γ-和δ-;1.4至2.6毫克/100克)和植物甾醇(菜油甾醇、豆甾醇和β-谷甾醇;220.5至362.7毫克/100克)。根据差示扫描量热法(DSC)结果,酯交换产物(S-RBO:FHSBO 1:1、1:1.5、1:2和1:3)在25℃下的固体脂肪含量分别为23.1%、27%、30.1%和44.9%。酯交换产物主要由β'晶型组成,含有少量β晶型。通过质地分析仪测量,酯交换产物(S-RBO:FHSBO 1:1.半)比物理混合物软,但比市售起酥油稍硬。因此,可以生产出具有潜在功能且具有各种物理性质的无反式硬脂原料。