Suppr超能文献

严重骨质疏松骨中骨水泥增强空心椎弓根螺钉的拔出强度:径向孔和预钻孔攻丝的影响

Pullout strength for cannulated pedicle screws with bone cement augmentation in severely osteoporotic bone: influences of radial hole and pilot hole tapping.

作者信息

Chen Lih-Huei, Tai Ching-Lung, Lai Po-Liang, Lee De-Mei, Tsai Tsung-Tin, Fu Tsai-Sheng, Niu Chi-Chien, Chen Wen-Jer

机构信息

Department of Orthopaedic Surgery, Chang Gung Memorial Hospital, Chang Gung University, Taoyuan, Taiwan.

出版信息

Clin Biomech (Bristol). 2009 Oct;24(8):613-8. doi: 10.1016/j.clinbiomech.2009.05.002. Epub 2009 May 29.

Abstract

BACKGROUND

Pedicle screw fixation in a severely osteoporotic spine remains a challenge for orthopedic surgeons. The previous literature does not adequately address the effects of radial holes for cannulated screws with cement injection and pilot hole tapping on the bone/screw interfacial strength.

METHODS

Specially designed cannulated pedicle screws, with or without radial holes, were installed in tapped and untapped pilot holes and then injected with cement. A uniform synthetic bone (test block) was used to provide a platform for each screw design. Specimens with inserted screws were then tested for axial pullout failure.

FINDINGS

(1) Cannulated screws with cement augmentation significantly increased the pullout strength in comparison to solid screws. Additionally, the amount of cement exuded from the cannulated screws increased with an increasing number of radial holes, leading to an increase in the average ultimate pullout strength for cannulated screws with a large number of radial holes. (2) Radiological examination indicated that the cement was exuded from the most proximal holes at the very beginning of its flow path, whereas no cement exudation was found at the remaining distal holes. (3) Cement exudation from the holes of cannulated screws into the open cell of the test block led to a composite (cement/bone) structure at the area of cement exudation. Observations of the failed specimens indicated that failure occurred at the composite/bone interface, while the composite was well bonded to the screws. This implies that the screw/composite interfacial strength was much higher than the composite/bone interfacial strength. (4) Tapping pilot holes decreased the pullout strength of the screws. Generally, larger standard deviations were found for the tapped cases, implying that untapped cases results are more repeatable than tapped cases results.

INTERPRETATION

Cannulated pedicle screws with radial holes combined with PMMA cement augmentation but without tapping may be a viable clinical option for achieving fixation in severely osteoporotic bone.

摘要

背景

对于骨科医生而言,在严重骨质疏松的脊柱中进行椎弓根螺钉固定仍是一项挑战。既往文献未能充分探讨带注射骨水泥的空心螺钉的径向孔以及预钻孔攻丝对骨/螺钉界面强度的影响。

方法

将特制的带或不带径向孔的空心椎弓根螺钉安装在已攻丝和未攻丝的预钻孔中,然后注入骨水泥。使用均匀的合成骨(测试块)为每种螺钉设计提供平台。接着对插入螺钉的标本进行轴向拔出失效测试。

结果

(1)与实心螺钉相比,骨水泥增强的空心螺钉显著提高了拔出强度。此外,空心螺钉渗出的骨水泥量随着径向孔数量的增加而增加,导致大量径向孔的空心螺钉平均极限拔出强度增加。(2)放射学检查表明,骨水泥在其流动路径的最开始从最近端的孔渗出,而在其余远端孔未发现骨水泥渗出。(3)空心螺钉孔中的骨水泥渗入测试块的开放孔隙中,在骨水泥渗出区域形成了一种复合材料(骨水泥/骨)结构。对失效标本的观察表明,失效发生在复合材料/骨界面,而复合材料与螺钉结合良好。这意味着螺钉/复合材料界面强度远高于复合材料/骨界面强度。(4)预钻孔攻丝降低了螺钉的拔出强度。一般来说,攻丝病例的标准差更大,这意味着未攻丝病例的结果比攻丝病例的结果更具可重复性。

解读

带径向孔的空心椎弓根螺钉结合聚甲基丙烯酸甲酯骨水泥增强但不进行攻丝,可能是在严重骨质疏松骨中实现固定的一种可行的临床选择。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验