Suppr超能文献

使用髓内骨骼动力撑开器进行股骨延长术。

Femoral lengthening with the Intramedullary Skeletal Kinetic Distractor.

作者信息

Simpson A H W R, Shalaby H, Keenan G

机构信息

Department of Orthopaedics, University of Edinburgh, Royal Infirmary of Edinburgh, 51 Little France Crescent, Edinburgh EH16 4SU, UK.

出版信息

J Bone Joint Surg Br. 2009 Jul;91(7):955-61. doi: 10.1302/0301-620X.91B7.21466.

Abstract

Femoral lengthening using the Intramedullary Skeletal Kinetic Distractor is a new technique. However, with intramedullary distraction the surgeon has less control over the lengthening process. Therefore, 33 femora lengthened with this device were assessed to evaluate the effect of operative variables under the surgeon's control on the course of lengthening. The desired lengthening was achieved in 32 of 33 limbs. Problems encountered included difficulty in achieving length in eight femora (24%) and uncontrolled lengthening in seven (21%). Uncontrolled lengthening was more likely if the osteotomy was placed with less than 80 mm of the thick portion of the nail in the distal fragment (p = 0.052), and a failure to lengthen was more likely if there was over 125 mm in the distal fragment (p = 0.008). The latter problem was reduced with over-reaming by 2.5 mm to 3 mm. Previous intramedullary nailing also predisposed to uncontrolled lengthening (p = 0.042), and these patients required less reaming. Using the Intramedullary Skeletal Kinetic Distractor, good outcomes were obtained; problems were minimised by optimising the position of the osteotomy and the amount of over-reaming performed.

摘要

使用髓内骨骼动力撑开器进行股骨延长是一项新技术。然而,采用髓内撑开时,外科医生对延长过程的控制较少。因此,对使用该装置延长的33根股骨进行了评估,以评价外科医生可控制的手术变量对延长过程的影响。33条肢体中有32条达到了预期的延长长度。遇到的问题包括8根股骨(24%)难以达到预期长度,7根(21%)出现不受控制的延长。如果截骨部位远端骨块中髓内钉粗的部分小于80 mm,则更有可能出现不受控制的延长(p = 0.052);如果远端骨块超过125 mm,则更有可能无法延长(p = 0.008)。通过扩大2.5 mm至3 mm可减少后一个问题。既往髓内钉固定也易导致不受控制的延长(p = 0.042),且这些患者所需的扩髓较少。使用髓内骨骼动力撑开器可获得良好的结果;通过优化截骨位置和扩髓量可将问题降至最低。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验