Department of Ophthalmology, Asan Medical Center, University of Ulsan College of Medicine, 388-1 Pungnap-2dong, Songpa-gu, Seoul 138-736, Korea.
Ophthalmic Physiol Opt. 2009 Nov;29(6):602-5. doi: 10.1111/j.1475-1313.2009.00675.x. Epub 2009 Aug 3.
Advances in corneal refractive surgery have allowed ophthalmologists to correct ocular higher-order aberrations. To obtain more information on the ocular aberrations generated from the optical axis, mydriasis is required. The aim of this study is to evaluate the changes in higher-order aberrations with the use of various mydriatics. Higher-order aberrations were measured in 21 eyes of 21 subjects (age range 24-37 years; 13 males, 8 females). Repeated measurements were conducted before and after the installation of three different mydriatics: 10% phenylephrine, 1% tropicamide, or 1% cyclopentolate. At a pupil size of 6 mm, the average root mean square value of higher-order aberrations (HO-RMS) was 0.430 mum in undilated eyes, and 0.413, 0.410, and 0.477 mum after installation of phenylephrine, tropicamide, and cyclopentolate, respectively. There were no statistically significant differences in the HO-RMS between the four conditions. There was a significant difference in the spherical aberration between the undilated or phenylephrine-treated eyes, compared to those treated with tropicamide or cyclopentolate. Cycloplegic mydriatics seemed to shift spherical aberration in a positive direction. These results suggest that mydriatics may affect higher-order aberrations, especially spherical aberration, and this should be considered when performing wavefront analysis and when correcting wavefront errors.
角膜屈光手术的进步使眼科医生能够矫正眼部高阶像差。为了获得更多关于光轴产生的眼部像差的信息,需要散瞳。本研究旨在评估不同散瞳剂对高阶像差的影响。对 21 名受试者(年龄 24-37 岁;男 13 名,女 8 名)的 21 只眼进行了高阶像差测量。在安装三种不同散瞳剂(10%苯肾上腺素、1%托吡卡胺或 1%环戊通)前后分别进行了重复测量。在瞳孔直径为 6mm 时,未散瞳眼的高阶像差均方根值(HO-RMS)的平均值为 0.430μm,分别使用苯肾上腺素、托吡卡胺和环戊通散瞳后,HO-RMS 分别为 0.413μm、0.410μm和 0.477μm。四种情况下的 HO-RMS 无统计学差异。与使用托吡卡胺或环戊通的情况相比,未散瞳或使用苯肾上腺素的眼的球差存在显著差异。睫状肌麻痹剂似乎使球差向正方向移动。这些结果表明,散瞳剂可能会影响高阶像差,特别是球差,在进行波前分析和校正波前误差时应考虑这一点。