A new apparatus is described for measuring visual intensity discrimination over a large range of intensities, with white light and with selected portions of the spectrum. With it measurements were made of the intensity DeltaI which is just perceptible when it is added for a short time to a portion of a field of intensity I to which the eye has been adapted. 2. For white and for all colors the fraction DeltaI/I decreases as I increases and reaches an asymptotic minimum value at high values of I. In addition, with white light the relation between DeltaI/I and I shows two sections, one at low intensities and the other at high intensities, the two being separated by an abrupt transition. These findings are contrary to the generally accepted measurements of Koenig and Brodhun; however, they confirm the recent work of Steinhardt, as well as the older work of Blanchard and of Aubert. The abrupt transition is in keeping with the Duplicity theory which attributes the two sections to the functions of the rods and cones respectively. 3. Measurements with five parts of the spectrum amplify these relationships in terms of the different spectral sensibilities of the rods and cones. With extreme red light the relation of DeltaI/I to I shows only a high intensity section corresponding to cone function, while with other colors the low intensity rod section appears and increases in extent as the light used moves toward the violet end of the spectrum. 4. Like most of the previously published data from various sources, the present numerical data are all described with precision by the theory which supposes that intensity discrimination is determined by the initial photochemical and chemical events in the rods and cones.
摘要
描述了一种新的仪器,用于测量白光和光谱选定部分的大范围强度的视觉强度辨别力。用它测量了当它在短时间内添加到眼睛已经适应的强度 I 的一部分时,刚刚可以察觉的强度增量ΔI。 2. 对于白光和所有颜色,当 I 增加时,增量ΔI/I 减小,并在 I 的高值处达到渐近最小值。此外,对于白光,ΔI/I 与 I 之间的关系显示出两个部分,一个在低强度部分,另一个在高强度部分,两者之间有一个突然的过渡。这些发现与 Koenig 和 Brodhun 的普遍接受的测量结果相反;然而,它们证实了 Steinhardt 的最近工作,以及 Blanchard 和 Aubert 的早期工作。突然的过渡符合二元理论,该理论将两个部分分别归因于杆和锥的功能。 3. 用光谱的五个部分进行的测量根据杆和锥的不同光谱灵敏度放大了这些关系。用极端红光,ΔI/I 与 I 的关系仅显示出与锥功能相对应的高强度部分,而对于其他颜色,低强度杆部分出现并随着所用光向光谱的紫色端移动而增加。 4. 与来自不同来源的大多数先前发布的数据一样,本数值数据都可以通过假设强度辨别力由杆和锥中的初始光化学和化学事件决定的理论精确描述。