Suppr超能文献

MX(5)(M = Nb、Ta;X = F、Cl)与简单二醚的配位加合物的结构和不寻常重排。晶体学、光谱学和计算研究。

Structures and unusual rearrangements of coordination adducts of MX(5) (M = Nb, Ta; X = F, Cl) with simple diethers. A crystallographic, spectroscopic, and computational study.

机构信息

Dipartimento di Chimica, Università di Firenze, Via della Lastruccia 3, I-50019 Sesto Fiorentino, Italy.

出版信息

Inorg Chem. 2010 Jan 4;49(1):339-51. doi: 10.1021/ic9020806.

Abstract

High-yield reactions of the pentafluoride complexes MF(5) (M = Nb, Ta) with a variety of diethers, ROCH(2)CH(R')OR'', afford the ionic derivatives [MF(4){kappa(2)-ROCH(2)CH(R')OR''}(2)][MF(6)] (2a-2e) or [MF(4){ROCH(2)CH(R')OR''}(2)][M(2)F(11)] (3a-3f) according to the metal/diether ratio employed. The structures of [MF(4)(kappa(2)-dme)(2)][MF(6)] [M = Nb (2a), Ta (2b); dme = MeOCH(2)CH(2)OMe] have been determined by X-ray diffraction. Moreover, the structure of the cationic part of 2a in the gas phase has been optimized by density functional theory calculations (the B3LYP/LANL2DZ method). An analogous computational study has allowed one to predict the existence of a heptacoordinated niobium cation within the species [NbCl(4)(dme)(2)][NbCl(6)]. This prediction has been confirmed by NMR identification at -60 degrees C of the complexes [MCl(4)(kappa(2)-dme)(kappa(1)-dme)][MCl(6)] [M = Nb (4a), Ta (4b)], obtained by the addition of dme to MCl(5) in CDCl(3). Activation of the coordinated diether in 2 and 3 takes place in solution at high temperature and generally proceeds via cleavage of C-O bonds and coupling of the fragments produced. Thus, OR(2) (R = Me, Et) and 1,4-dioxane have been obtained selectively upon thermal reaction of MF(5) with dme, diglyme, or 1,2-diethoxyethane, followed by treatment with water. In analogous conditions, 1,2-dimethoxypropane converts mainly into acetone and dimethyl ether. The formation of dioxane from dme occurs in high yield also by using a catalytic amount of NbF(5). The activation of dme by NbF(5) follows a pathway different from that previously reported for NbCl(5), and an explanation based on the thermodynamic parameters calculated at the B3LYP/LANL2DZ level is given: the formation of Me(2)O and dioxane is the most favored reaction between NbF(5) and dme (DeltaG(r) degrees = -15.16 kcal x mol(Nb)(-1)), while the formation of MeCl and dioxane is the most favored reaction in the case of NbCl(5)/dme (DeltaG(r) degrees = -53.13 kcal x mol(Nb)(-1)).

摘要

高价五氟化物配合物 MF(5)(M = Nb,Ta)与各种二醚 ROCH(2)CH(R')OR'' 的反应,生成离子衍生物 [MF(4){kappa(2)-ROCH(2)CH(R')OR''}(2)][MF(6)] (2a-2e) 或 [MF(4){ROCH(2)CH(R')OR''}(2)][M(2)F(11)] (3a-3f),具体取决于金属/二醚的比例。[MF(4)(kappa(2)-dme)(2)][MF(6)] [M = Nb (2a),Ta (2b); dme = MeOCH(2)CH(2)OMe] 的结构通过 X 射线衍射确定。此外,通过密度泛函理论计算(B3LYP/LANL2DZ 方法)优化了 2a 阳离子部分在气相中的结构。类似的计算研究允许人们预测在 [NbCl(4)(dme)(2)][NbCl(6)]物种中存在七配位铌阳离子。该预测得到了通过在 CDCl(3)中添加 dme 到 MCl(5)中获得的复合物 [MCl(4)(kappa(2)-dme)(kappa(1)-dme)][MCl(6)] [M = Nb (4a),Ta (4b)] 的 NMR 在-60 摄氏度下的鉴定的证实。在高温下,2 和 3 中的配位二醚在溶液中活化,通常通过 C-O 键的断裂和产生的片段的偶联进行。因此,MF(5)与二乙醚、二甘醇或 1,2-二乙氧基乙烷反应后,选择性地得到了 OR(2)(R = Me,Et)和 1,4-二氧六环。在类似的条件下,1,2-二甲氧基丙烷主要转化为丙酮和二甲醚。在使用催化量的 NbF(5)时,也可以从二乙醚高产率地生成二氧六环。NbF(5)对二乙醚的活化遵循与以前报道的 NbCl(5)不同的途径,并且给出了基于在 B3LYP/LANL2DZ 水平计算的热力学参数的解释:NbF(5)和二乙醚之间最有利的反应是形成 Me(2)O 和二氧六环(DeltaG(r) degrees = -15.16 kcal x mol(Nb)(-1)),而 NbCl(5)/dme 情况下最有利的反应是形成 MeCl 和二氧六环(DeltaG(r) degrees = -53.13 kcal x mol(Nb)(-1))。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验