特发性胸椎侧凸矢状面和额状面畸形矫正的相关性及其与术后矢状面排列的关系。
Coupling between sagittal and frontal plane deformity correction in idiopathic thoracic scoliosis and its relationship with postoperative sagittal alignment.
机构信息
Department of Orthopedics and Traumatology, University of Hong Kong, Queen Mary Hospital, Pokfulam Road, Hong Kong SAR, China.
出版信息
Spine (Phila Pa 1976). 2010 May 15;35(11):1158-64. doi: 10.1097/BRS.0b013e3181bb49f3.
STUDY DESIGN
Prospective clinical-radiographic study.
OBJECTIVES
To investigate the natural coupling behavior between frontal deformity correction and the simultaneous changes in thoracic kyphosis, and to examine how the postoperative thoracic sagittal realignment relates to this natural coupling behavior.
SUMMARY OF BACKGROUND DATA
Restoration of the sagittal alignment is one of the fundamental goals in scoliosis correction surgery. It is generally achieved by rod precontouring intraoperatively. However, clinical studies suggested that postoperative sagittal realignment seems to be more affected by the inherent properties of the spine rather than the instrumentation or the surgical maneuver.
METHODS
Ninety-eight idiopathic scoliosis patients with thoracic curves treated with one-stage posterior spinal fusion, using corrective segmental spinal instrumentation (hook-rod or pedicle screw-rod constructs) were investigated. Pre- and postoperative frontal and sagittal alignments were measured by standing anteroposterior and lateral radiographs. Preoperative frontal plane flexibility was assessed by the fulcrum bending radiograph in the standard manner, an additional radiograph was taken in the lateral plane, to assess how this frontal correction force affects sagittal plane alignment (lateral fulcrum bending radiograph).
RESULTS
When thoracic frontal deformity was corrected under fulcrum bending, coupled changes in the thoracic kyphosis demonstrated 3 different patterns: thoracic kyphosis increased in 25 patients with a mean kyphosis of 9 degrees to 19 degrees, decreased in 45 with a mean of 34 degrees to 21 degrees and remained unchanged (within 3 degrees ) in 28 with a mean of 19 degrees to 18 degrees. After surgery, the direction of correction of thoracic kyphosis significantly correlated with the coupling patterns demonstrated on fulcrum bending radiographs (r = 0.579, P < 0.001). However, the actual postoperative thoracic kyphosis angle cannot be predicted by the preoperative lateral fulcrum bending radiograph. There was no statistically significant difference (P = 0.263) between using pedicle screws and hooks in achieving the additional correction beyond what was demonstrated on the lateral fulcrum bending radiographs.
CONCLUSION
Changes in thoracic kyphosis on fulcrum bending due to natural coupling of deformities are directed towards "self-normalization." There is no difference in the sagittal plane deformity correction with the use of hook-rod system or pedicle screw-rod constructs. This can be used as a guideline for exact preoperative rod contouring to reduce the stress on the bone-implant interface and the rate of postoperative failures. The findings also suggest that it is not how big or strong the implants are, but rather the natural curve behavior will at least partially determine the final sagittal outcome.
研究设计
前瞻性临床影像学研究。
目的
研究额状面畸形矫正与同期胸椎后凸变化之间的自然耦合行为,并探讨术后胸椎矢状面对线与这种自然耦合行为的关系。
背景资料概要
恢复矢状面排列是脊柱侧凸矫正手术的基本目标之一。通常通过术中杆预塑形来实现。然而,临床研究表明,术后矢状面矫正似乎更多地受到脊柱固有特性的影响,而不是器械或手术操作的影响。
方法
研究了 98 例特发性脊柱侧凸患者,这些患者采用一期后路脊柱融合术,使用矫正节段性脊柱内固定器械(钩棒或椎弓根螺钉棒)。通过站立前后位和侧位 X 线片测量术前和术后的额状面和矢状面排列。通过标准的弯棒测前路柔韧性评估术前额状面柔韧性,另外拍摄侧位 X 线片,以评估额状面矫正力如何影响矢状面排列(侧位弯棒 X 线片)。
结果
在弯棒下矫正胸椎额状面畸形时,胸椎后凸的耦合变化表现出 3 种不同的模式:25 例患者的胸椎后凸增加,平均增加 9 度至 19 度;45 例患者的胸椎后凸减少,平均减少 34 度至 21 度;28 例患者的胸椎后凸保持不变(在 3 度以内),平均为 19 度至 18 度。手术后,胸椎后凸矫正的方向与弯棒影像学上显示的耦合模式显著相关(r = 0.579,P < 0.001)。然而,术前侧位弯棒影像学并不能预测术后实际的胸椎后凸角度。使用椎弓根螺钉和钩在侧位弯棒影像学上显示的额外矫正方面没有统计学差异(P = 0.263)。
结论
由于畸形的自然耦合,弯棒时胸椎后凸的变化是朝着“自我正常化”的方向进行的。使用钩棒系统或椎弓根螺钉棒内固定器在矢状面畸形矫正方面没有差异。这可以作为术前精确棒塑形的指导,以减少骨-植入物界面的应力和术后失败的发生率。研究结果还表明,决定最终矢状面结果的不是植入物的大小或强度,而是脊柱的自然曲线行为。