Suppr超能文献

采用集成微流控装置研究胰岛素样生长因子-1 和碱性成纤维细胞生长因子对胶原凝胶中包埋的软骨细胞增殖的影响。

The effects of insulin-like growth factor-1 and basic fibroblast growth factor on the proliferation of chondrocytes embedded in the collagen gel using an integrated microfluidic device.

机构信息

Department of Orthopaedics, First Affiliated Hospital of Dalian Medical University, Dalian, PR China.

出版信息

Tissue Eng Part C Methods. 2010 Dec;16(6):1267-75. doi: 10.1089/ten.TEC.2009.0682. Epub 2010 Apr 9.

Abstract

This work presents an integrated microfluidic device on which the proliferation of rabbit chondrocytes was investigated in the presence of insulin-like growth factor-1 (IGF-1), basic fibroblast growth factor (bFGF), and their combinations. The microfluidic device was mainly composed of an upstream concentration gradient generator and a downstream perfusion-based three-dimensional cell culture module. The rabbit articular chondrocytes were cultured for 2 weeks at the different concentrations of growth factors generated by concentration gradient generator. IGF-1, up to 57.14 ng/mL, had the ability to promote the proliferation of chondrocytes in a dose-dependent manner, and there were no further promotions at higher concentrations. bFGF increased chondrocyte proliferation dose dependently up to 5.72 ng/mL, and then the proliferation rate decreased when the concentration was increased. The combination of IGF-1 and bFGF could synergistically promote the proliferation, and the group of 85.73 ng/mL IGF-1 and 1.43 ng/mL bFGF presented an optimal effect (up to 4.76-fold), which had statistically significant differences compared with IGF-1 and bFGF, respectively. Moreover, the proliferation test using the conventional method was performed simultaneously and revealed similar results. The results obtained in this study demonstrated that the microfluidic device is an effective platform for cartilage tissue engineering. With this device, experimental conditions are flexible and can be optimized by changing either the category of growth factors or the concentration of input growth factor. Further, the small number of cells (1-100) required, with which parallel experiments could be performed simultaneously, makes it an attractive platform for the high-through screening at the cellular level in autologous chondrocyte implantation.

摘要

本工作展示了一种集成微流控装置,该装置用于研究胰岛素样生长因子-1(IGF-1)、碱性成纤维细胞生长因子(bFGF)及其组合对兔软骨细胞增殖的影响。微流控装置主要由上游浓度梯度发生器和下游基于灌注的三维细胞培养模块组成。在浓度梯度发生器产生的不同浓度生长因子的作用下,兔关节软骨细胞培养 2 周。IGF-1 以剂量依赖的方式促进软骨细胞增殖,最高可达 57.14ng/mL,在更高浓度下没有进一步的促进作用。bFGF 以剂量依赖的方式促进软骨细胞增殖,最高可达 5.72ng/mL,然后当浓度增加时增殖率下降。IGF-1 和 bFGF 的组合可以协同促进增殖,85.73ng/mL IGF-1 和 1.43ng/mL bFGF 的组合效果最佳(高达 4.76 倍),与 IGF-1 和 bFGF 相比均有统计学意义。此外,同时进行了常规方法的增殖试验,得到了相似的结果。本研究结果表明,微流控装置是一种有效的软骨组织工程平台。使用该装置,实验条件灵活,可以通过改变生长因子的种类或输入生长因子的浓度进行优化。此外,所需的细胞数量少(1-100 个),可以同时进行平行实验,使其成为自体软骨细胞移植中细胞水平高通量筛选的有吸引力的平台。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验