Suppr超能文献

经导管闭合大型房间隔缺损(>/=25mm)的形态学特征及相关技术改良需求因素。

Morphologic Characteristics and Relating Factors to the Need of Technical Modification in Transcatheter Closure of Large Atrial Septal Defect (>/=25 mm).

机构信息

Division of Pediatric Cardiology, Severance Cardiovascular Hospital, Yonsei University Health System, Seoul, Korea.

出版信息

Korean Circ J. 2010 Apr;40(4):191-6. doi: 10.4070/kcj.2010.40.4.191. Epub 2010 Apr 22.

Abstract

BACKGROUND AND OBJECTIVES

The rigid coupling between the delivery wire and the right atrial disk has been occasionally encountered during transcatheter closure of atrial septal defect (ASD). Therefore the device frequently makes a perpendicular angle, and the leading edge of left atrial disk slips through the defect and prolapses into right atrium (RA) before it is properly placed in the septum. The purpose of this study is to investigate relating factors to the need of technical modification in transcatheter closure of large ASD and to evaluate relevant morphologic characteristics of atrial septal rim in this situation.

SUBJECTS AND METHODS

From July, 2003 to May, 2007, 312 patients underwent transcatheter occlusion of ASD with Amplatzer Septal Occluder(R) (ASO, AGA medical corporation, Golden Valley, MN, USA) at Yonsei Cardiovascular Center and among them 109 patients had large ASD (>/=25 mm) and these patients were enrolled in our study. Patients were divided into two groups according to the deploying methods of the device (Group I: standard method, Group II: modified methods). Assessments of the defects and its surrounding rims were made by echocardiography.

RESULTS

There were no differences between 2 groups in age, body weight and height except for balloon-stretched diameter (stop-flow technique) and device size. Group II patients with modified methods showed larger balloon-stretched diameter and device size than group I patients with standard method. The mean length of anterosuperior (AS) rim in group II was significantly shorter than group I (p<0.05). As the size of the device used in procedure increased, there was a trend towards increase in the need of modified methods.

CONCLUSION

This study shows that AS rim deficiency and the size of ASD may be the relating factors to the need of technical modification in transcatheter closure of ASD. Therefore, when the initial try with standard method is not successful in large ASD with deficient AS rim, we suggest that changing strategy of implantation may save time and efforts and possibly reduce the risk of complications associated with prolonged procedure.

摘要

背景和目的

在经导管封堵房间隔缺损(ASD)的过程中,输送线和右心房盘之间存在刚性连接,因此器械经常形成垂直角度,左心房盘的前缘在正确放置在间隔之前穿过缺损并突入右心房(RA)。本研究的目的是探讨与经导管封堵大 ASD 中需要技术修正相关的因素,并评估这种情况下房间隔边缘的相关形态特征。

对象和方法

2003 年 7 月至 2007 年 5 月,在延世心血管中心,312 例患者接受了 Amplatzer 房间隔封堵器(ASO,AGA 医疗公司,明尼苏达州 Golden Valley)经导管 ASD 封堵术,其中 109 例患者患有大 ASD(>/=25mm),这些患者被纳入本研究。根据器械的展开方法,患者分为两组(组 I:标准方法,组 II:改良方法)。通过超声心动图评估缺损及其周围边缘。

结果

两组患者的年龄、体重和身高无差异,除球囊扩张直径(停流技术)和器械尺寸外。采用改良方法的 II 组患者的球囊扩张直径和器械尺寸明显大于采用标准方法的 I 组患者。II 组患者的前上(AS)缘长度明显短于 I 组(p<0.05)。随着手术中器械尺寸的增大,改良方法的需求呈增加趋势。

结论

本研究表明,AS 缘缺损和 ASD 大小可能是经导管 ASD 封堵中需要技术修正的相关因素。因此,在 AS 缘缺损较大的 ASD 中,初始尝试标准方法不成功时,我们建议改变植入策略可以节省时间和精力,并可能降低与手术时间延长相关的并发症风险。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验