Salmon J T, Laurendeau N M
Appl Opt. 1987 Jul 15;26(14):2881-91. doi: 10.1364/AO.26.002881.
An experimental protocol, using photoionization controlled-loss spectroscopy (PICLS), has been developed for obtaining absolute number densities of atomic hydrogen from laser-induced fluorescence measurements in flames. Two laser beams are employed, the first to excite hydrogen atoms from the ground state to the second excited state via two-photon absorption and the second to strongly photoionize the excited atoms. The resulting fluorescence measurements are independent of quenching. A model is presented that assures the viability of PICLS as long as the photoionization rate is greater than or equal to the quenching rate. The model is verified in fuel-lean, stoichiometric, and fuel-rich flat premixed H(2)/O(2)/N(2) flames at pressures of 20 and 72 Torr. Over this range in pressure, the ratio of number densities obtained from PICLS to those calculated from partial equilibrium is constant to within 20%. Most of the error arises from the sensitivity of the partial equilibrium calculat ions to small uncertainties in both the fuel-oxidizer ratio and the measured OH concentration. Because of the quenching-independent nature of PICLS, quantitative fluorescence measurements can be made by calibrating at a single favorable flame condition.
已开发出一种使用光电离控制损失光谱法(PICLS)的实验方案,用于通过火焰中的激光诱导荧光测量来获取氢原子的绝对数密度。使用两束激光,第一束通过双光子吸收将氢原子从基态激发到第二激发态,第二束将激发态原子强烈光电离。由此产生的荧光测量与猝灭无关。提出了一个模型,该模型确保只要光电离速率大于或等于猝灭速率,PICLS就是可行的。该模型在压力为20和72托的贫燃料、化学计量比和富燃料的平面预混H₂/O₂/N₂火焰中得到验证。在这个压力范围内,从PICLS获得的数密度与根据局部平衡计算得到的数密度之比在20%以内保持恒定。大部分误差源于局部平衡计算对燃料-氧化剂比和测量的OH浓度的小不确定性的敏感性。由于PICLS与猝灭无关的性质,可以通过在单个有利的火焰条件下进行校准来进行定量荧光测量。