-(2,3-dihydroxypropyl)-´-(2-hydroxyethyl)-5-[-(2,3-dihydroxypropyl)acetamido]-2,4,6-triiodoisophthalamide (ioxilan) is a nonionic X-ray contrast agent approved by the United States Food and Drug Administration for X-ray imaging contrast enhancement (1, 2). Ioxilan can be administered intravenously for excretory urography and contrast-enhanced computed tomography (CT) imaging of the head and body (3). Ioxilan can also be given intraarterially for cerebral arteriograpy, coronary arteriography and left ventriculography, visceral angiography, aortography, and peripheral arteriography. Techniques for X-ray imaging (planar and tomographic) depend on tissue density differences that provide the image contrast produced by X-ray attenuation between the area of interest and its surrounding tissues (4, 5). Contrast enhancement (opacification) with use of contrast agents increases the degree of contrast and improves the differentiation of pathologic processes from normal tissues. Because iodine, an element of high atomic density, causes high attenuation of X-rays within the diagnostic energy spectrum, water-soluble and reasonably safe iodinated contrast agents in intravenously injectable forms have been developed for clinical applications (6, 7). Water-soluble, intravenous X-ray contrast agents are generally organic iodine compounds that contain one or more tri-iodinated benzene rings (8, 9). When injected intravenously, they are largely distributed in the extracellular fluid space and excreted unchanged by the kidneys (10). Contrast enhancement of a region of interest depends on the route of administration, delivery of the agent to the area by blood flow, and the final iodine concentration in the region. There are two basic types of these compounds: ionic and nonionic agents. The first monomeric ionic compound, in the form of 2,4,6-triiodobenzene acetrizoic acid, was synthesized by Wallingford (6). Most ionic contrast agents are derived from the basic structures of 3,5-diamino-2,4,6-triiodobenzoic acid, 5-amino-2,4,5-triiodoisophthalic acid, or 2,4,6-triiodobenzene-1,3,5-tricarbonic acid. In addition to monoacidic ionic dimers, nonionic compounds have also been developed to improve the tolerance of these agents in patients. The basic strategy of developing nonionic agents is to eliminate the electrical charges in the structure, which will lead to a reduction in osmolality of the compound. Because osmolality is related to the number of particles in solution, the challenge is to reduce the number of particles but maintain the iodine concentration (11). This is generally achieved by conversion of the carboxyl groups to hydroxyalkylamide groups (12). As a low-osmolar nonionic monomer, ioxilan was developed in an effort to increase the safety and tolerance of X-ray contrast agents. The development of ioxilan was based on the belief that the introduction of a double methylene as a hydrophobic region and masking it with a hydrophilic hydroxyl group could lower the osmolality without adversely affecting the biological tolerance (13). Ioxilan is available commercially in preparations of 300 mg I/ml (632 mg ioxilan) and 350 mg I/ml (727 mg ioxilan). Their measured osmolality values (mOsm/kg water) at 37ºC are 585 and 695, respectively. The viscosity values (cP) at 37ºC are 5.1 and 8.1, respectively.
(2,3 - 二羟基丙基)-α-(2 - 羟乙基)-5 - [α-(2,3 - 二羟基丙基)乙酰氨基]-2,4,6 - 三碘间苯二甲酰胺(碘克沙醇)是一种经美国食品药品监督管理局批准用于X射线成像增强造影的非离子型X射线造影剂(1,2)。碘克沙醇可静脉注射用于排泄性尿路造影以及头部和身体的增强计算机断层扫描(CT)成像(3)。碘克沙醇也可动脉内给药用于脑血管造影、冠状动脉造影、左心室造影、内脏血管造影、主动脉造影和外周动脉造影。X射线成像技术(平面和断层)取决于组织密度差异,这些差异提供了感兴趣区域与其周围组织之间因X射线衰减而产生的图像对比度(4,5)。使用造影剂进行的增强造影(显影)增加了对比度,并改善了病理过程与正常组织的区分。由于碘是一种高原子密度元素,在诊断能谱范围内会导致X射线的高衰减,因此已开发出静脉注射形式的水溶性且相对安全的碘化造影剂用于临床应用(6,7)。水溶性静脉注射X射线造影剂通常是含有一个或多个三碘化苯环的有机碘化合物(8,9)。静脉注射后,它们主要分布在细胞外液空间,并由肾脏原样排泄(10)。感兴趣区域的增强造影取决于给药途径、通过血流将造影剂输送到该区域以及该区域最终的碘浓度。这些化合物有两种基本类型:离子型和非离子型。第一种单体离子型化合物,即2,4,6 - 三碘苯乙酰三碘苯甲酸,由沃林福德合成(6)。大多数离子型造影剂源自3,5 - 二氨基 - 2,4,6 - 三碘苯甲酸、5 - 氨基 - 2,4,5 - 三碘间苯二甲酸或2,4,6 - 三碘苯 - 1,3,5 - 三碳酸的基本结构。除了单酸性离子二聚体之外,还开发了非离子型化合物以提高这些药物在患者中的耐受性。开发非离子型药物的基本策略是消除结构中的电荷,这将导致化合物的渗透压降低。由于渗透压与溶液中的粒子数量有关,挑战在于减少粒子数量但保持碘浓度(11)。这通常通过将羧基转化为羟烷基酰胺基团来实现(12)。作为一种低渗非离子单体,碘克沙醇的开发旨在提高X射线造影剂的安全性和耐受性。碘克沙醇的开发基于这样一种信念,即引入一个双亚甲基作为疏水区域并用一个亲水羟基对其进行掩盖可以降低渗透压而不会对生物耐受性产生不利影响(13)。碘克沙醇有市售制剂,浓度分别为300 mg I/ml(632 mg碘克沙醇)和350 mg I/ml(727 mg碘克沙醇)。它们在37℃时测得的渗透压值(mOsm/kg水)分别为585和695。在37℃时的粘度值(cP)分别为5.1和8.1。