Suppr超能文献

[使用防髋臼前突笼对严重骨缺损髋臼杯进行置换]

[Exchange of acetabular cups with severe bone defects using antiprotrusion cages].

作者信息

Fink Bernd, Grossmann Alexandra, Sebena Pavel

机构信息

Orthopädische Klinik, Markgröningen, Germany.

出版信息

Oper Orthop Traumatol. 2010 Jul;22(3):256-67. doi: 10.1007/s00064-010-8025-x.

Abstract

OBJECTIVE

Replacement of a loosened acetabular cup attended by massive bone defects involving both columns. Acetabular restoration and proof fixation of a new acetabular cup to restore a pain-free joint function.

INDICATIONS

Segmental acetabular bone defects involving both columns (Paprosky type 3A, 3B) with loosened acetabular cup or a Girdlestone situation. In case of pelvic discontinuity (Paprosky type 4) combination with reconstructive osteosynthesis plates (for example, Synthes company, Bochum, Germany).

CONTRAINDICATIONS

In cases of complete absence of the posterior and especially cranioposterior column combination with structural allograft reconstruction necessary. Relative: acetabular defects, that can be reconstructed by other, smaller implants, for example, press-fit acetabular cups.

SURGICAL TECHNIQUE

Exposure of the acetabulum by a conventional approach. Removal of the loosened acetabular cup. Cleaning of the acetabulum with a sharp spoon. Rebuilding of the hip center with a reamer. Choice of the size of the antiprotrusion ring using trial implants. Access chiseling for the inferior implant flange into the ischium. If necessary, adaptation of the superior and inferior flange alignment to the individual anatomy by bending. Filling of bone defects with allogenic bone chips. Knocking in of the inferior flange into the ischium. Simultaneous knocking in of both the ring in the acetabulum and the superior flange at the ischium. Screwing in of bolts from the interior of the ring into the iliac bone in the direction of hip forces. Additional positioning of screws due to the superior flange into the iliac bone. Cementing in of a polyethylene cup in the antiprotrusion ring.

POSTOPERATIVE MANAGEMENT

Antithrombotic prophylaxis, physical therapy, gait training under full weight bearing of the limb.

RESULTS

30 acetabular cup revisions with a new Burch-Schneider ring underwent prospective clinical and radiologic examination and were analyzed for an average follow-up of 20.6+/-7.8 months (3-36 months). The Harris Hip Score increased from preoperative 46.6 to postoperative 75.9 points. A loosening of the cage was not recorded.

摘要

目的

更换松动的髋臼杯,同时伴有累及双侧髋臼柱的大量骨缺损。进行髋臼重建并牢固固定新的髋臼杯,以恢复无痛的关节功能。

适应证

双侧髋臼柱节段性骨缺损(Paprosky 3A、3B型)伴髋臼杯松动或处于Girdlestone状态。骨盆连续性中断(Paprosky 4型)时,需结合重建接骨板(如德国波鸿的Synthes公司产品)。

禁忌证

完全缺失后柱尤其是颅后柱组合,需进行结构性同种异体骨移植重建的情况。相对禁忌证:可通过其他较小植入物(如压配式髋臼杯)重建的髋臼缺损。

手术技术

采用传统方法暴露髋臼。取出松动的髋臼杯。用锐利刮匙清理髋臼。用扩孔钻重建髋关节中心。使用试验性植入物选择防突出环的尺寸。将下方植入物凸缘凿入坐骨。必要时,通过弯曲使上下凸缘对齐适应个体解剖结构。用同种异体骨碎片填充骨缺损。将下方凸缘敲入坐骨。同时将环敲入髋臼,将上方凸缘敲入坐骨。从环内部将螺栓沿髋关节受力方向拧入髂骨。因上方凸缘额外将螺钉拧入髂骨。将聚乙烯杯用骨水泥固定在防突出环内。

术后处理

抗血栓预防,物理治疗,肢体完全负重下的步态训练。

结果

30例采用新型Burch-Schneider环进行髋臼杯翻修的患者接受了前瞻性临床和影像学检查,平均随访20.6±7.8个月(3 - 36个月)。Harris髋关节评分从术前的46.6分提高到术后的75.9分。未记录到笼子松动情况。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验