Department of Chemistry, Carnegie Mellon University, Pittsburgh, Pennsylvania 15213, USA.
J Phys Chem B. 2010 Aug 12;114(31):10160-70. doi: 10.1021/jp105021b.
Solvation structure and dynamics of a saturated solution of carbon dioxide in the room-temperature ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate (BMI+PF6-) at 313 K and 0.15 kbar are investigated via molecular dynamics computer simulations by employing a diatomic probe solute. It is found that the mixture shows preferential solvation, which is mainly controlled by the solute-BMI+PF6- electrostatic interactions and thus dictates differing roles for CO2 as the solute charge distribution varies. The local structure and density of BMI+PF6- and CO2 in the vicinity of the solute become enhanced and reduced, respectively, as its dipole moment increases. As a result, equilibrium solvation dynamics of a nonpolar solute in the mixture have a strong CO2 character, whereas those of a dipolar solute are very similar to, albeit faster than, solvation dynamics in pure BMI+PF6-. Related nonequilibrium solvent response couched in dynamic Stokes shifts and accompanying solvation structure relaxation, in particular, CO2 structure reorganization, shows interesting dependence on the solute charge distribution. Ion transport in the mixture is much faster than in pure BMI+PF6-, indicating that the addition of cosolvent CO2 reduces the viscosity of the ionic liquid, significantly. The effective polarity of the mixture, measured as solvation-induced stabilization of a dipolar solute, is found to be comparable to that of neat BMI+PF6-, consonant with solvatochromic measurements.
在 313 K 和 0.15 kbar 下,通过使用双原子探针溶质,通过分子动力学计算机模拟研究了二氧化碳在室温离子液体 1-丁基-3-甲基咪唑六氟磷酸盐(BMI+PF6-)中的饱和溶液的溶剂化结构和动力学。发现混合物表现出优先溶剂化,这主要由溶质-BMI+PF6-静电相互作用控制,从而决定了 CO2 作为溶质电荷分布变化的不同作用。溶质附近的 BMI+PF6-和 CO2 的局部结构和密度分别增强和减少,随着其偶极矩的增加。结果,混合物中非极性溶质的平衡溶剂化动力学具有很强的 CO2 特征,而极性溶质的溶剂化动力学非常类似于但快于纯 BMI+PF6-中的溶剂化动力学。相关的非平衡溶剂响应,包括动态斯托克斯位移和伴随的溶剂化结构松弛,特别是 CO2 结构重组,表现出对溶质电荷分布的有趣依赖性。混合物中的离子传输速度远快于纯 BMI+PF6-,表明添加共溶剂 CO2 显著降低了离子液体的粘度。混合物的有效极性,作为对极性溶质的溶剂化诱导稳定化来衡量,被发现与纯 BMI+PF6-相当,与溶剂化变色测量一致。