Department of Applied Chemistry, University of Tabriz, Tabriz, Iran.
Water Sci Technol. 2010;62(5):1112-20. doi: 10.2166/wst.2010.438.
In this paper the photocatalytic decolorisation and mineralisation of three orange dyes (AO10, AO12 and AO8) in neutral, alkaline and hydrolysed solutions under UV light irradiation in the presence of TiO(2) nanoparticles has been compared. The investigated photocatalyst was Millennium PC-500 TiO(2) (crystallites mean size 5-10 nm) immobilised on non-woven paper. All the experiments were performed in a circulation photochemical reactor equipped with a 15 W UV lamp emitting around 365 nm. Results indicated that complete decolorisation of 250 mL pure dye solutions with initial dye concentration of 30 mg/L could be achieved in 140 min. Photocatalytic mineralisation of the neutral, alkaline and hydrolysed dye solutions was monitored by total organic carbon (TOC) decrease and ammonium ion formation. Results indicated that the photocatalytic decolorisation and mineralisation of the dyes was less efficient with the hydrolysed and alkaline dye solutions in comparison with the neutral pure dye solutions. The amount of NH(4)(+), as N-containing mineralisation product, during UV/TiO(2) process was analysed. The electrical energy consumption for photocatalytic decolorisation of the dyes was calculated and related to the treatment costs.
本文比较了在中性、碱性和水解溶液中,在 UV 光照射下,TiO2 纳米粒子存在的情况下,三种橙色染料(AO10、AO12 和 AO8)的光催化脱色和矿化作用。研究用的光催化剂是 Millennium PC-500 TiO2(结晶粒径为 5-10nm)固定在无纺纸上。所有实验均在带有 15W 紫外灯(发射波长约 365nm)的循环光化学反应器中进行。结果表明,在 140 分钟内,初始染料浓度为 30mg/L 的 250mL 纯染料溶液可完全脱色。通过总有机碳(TOC)的减少和铵离子的形成来监测中性、碱性和水解染料溶液的光催化矿化作用。结果表明,与中性纯染料溶液相比,水解和碱性染料溶液的光催化脱色和矿化效率较低。在 UV/TiO2 过程中,作为含 N 矿化产物的 NH4+的量进行了分析。计算了光催化脱色染料所需的电能,并与处理成本进行了关联。