Characterization of lead, barium and strontium leachability from foam glasses elaborated using waste cathode ray-tube glasses.

Foam glass manufacture is a promising mode for re-using cathode ray tube (CRT) glasses. Nevertheless, because CRTs employ glasses containing heavy metals such as lead, barium and strontium, the leaching behaviour of foam glasses fabricated from CRTs must be understood. Using the AFNOR X 31-210 leaching assessment procedure, the degree of element inertization in foam glasses synthesized from waste CRT glasses (funnel and panel glasses, containing lead and barium/strontium respectively) were determined. The amount of leached lead from foam glasses prepared from funnel glass depends on the nature and concentration of the reducing agent. The effects of the reducing agents on the generation of cellular structure in the fabrication of foam glass were studied. The fraction of lead released from foam glass was less than those extracted from funnel glass and was lower than the statutory limit. Leached concentrations of barium and strontium were found to be approximately constant in various tests and were also below regulatory limits.