Planar LiTaO(3) waveguides fabricated by proton exchange in concentrated and diluted pyrophosphoric acid with annealing.

Annealed proton-exchanged z-cut LiTaO(3) planar waveguides fabricated with pyrophosphoric acid have been characterized. For proton exchange, the extraordinary index increase Δ n(e) ranged from 0.0119 to 0.0141, depending on the exchange temperature. The effective diffusion coefficient D(e) ranged from 0.1325 μm(2)/h at 240°C to 0.545 μm(2)/h at 280 °C. Single-mode propagation losses were α = 0.7 dB/cm. Compared with benzoic acid, pyrophosphoric acid produces waveguides with a higher Δ n(e) and a lower propagation loss. For proton exchange in lithium phosphate-diluted pyrophosphoric acid, a lower Δ n(e) was obtained, but D(e) and propagation losses were not reduced. After proton exchange, the waveguides were annealed. The surface index initially increased, peaked, and then decreased. The waveguide depth d and the surface index n(s) were measured at regular intervals. Figures and empirical formulas relating the waveguide depth d and the surface index increase Δ n(s) to the anneal time, anneal temperatures, and the waveguide depth after proton exchange are given. An example is given in which, the desired waveguide parameters d and Δ n(s), the fabrication conditions could be calculated with the previously derived formulas. Propagation losses decreased to 0.4 dB/cm after prolonged annealing.