Leibniz Institute of Polymer Research Dresden, 01069 Dresden, Germany.
J Chem Phys. 2010 Dec 28;133(24):244903. doi: 10.1063/1.3514892.
Pure melts of asymmetric diblock copolymers are studied by means of the off-lattice Gaussian disphere model with Monte-Carlo kinetics. In this model, a diblock copolymer chain is mapped onto two soft repulsive spheres with fluctuating radii of gyration and distance between centers of mass of the spheres. Microscopic input quantities of the model such as the combined probability distribution for the radii of gyration and the distance between the spheres as well as conditional monomer number densities assigned to each block were derived in the previous work of F. Eurich and P. Maass [J. Chem. Phys. 114, 7655 (2001)] within an underlying Gaussian chain model. The polymerization degree of the whole chain as well as those of the individual blocks are freely tunable parameters thus enabling a precise determination of the regions of stability of various phases. The model neglects entanglement effects which are irrelevant for the formation of ordered structures in diblock copolymers and which would otherwise unnecessarily increase the equilibration time of the system. The gyroid phase was reproduced in between the cylindrical and lamellar phases in systems with box sizes being commensurate with the size of the unit cell of the gyroid morphology. The region of stability of the gyroid phase was studied in detail and found to be consistent with the prediction of the mean-field theory. Packing frustration was observed in the form of increased radii of gyration of both blocks of the chains located close to the gyroid nodes.
采用无格子高斯离散球模型和蒙特卡罗动力学研究了不对称两嵌段共聚物的纯熔体。在该模型中,两嵌段共聚物链被映射到两个具有变化的回转半径和质心距离的软排斥性球体上。模型的微观输入量,如回转半径和球体之间的距离的联合概率分布,以及分配给每个嵌段的条件单体数密度,在 F. Eurich 和 P. Maass 的先前工作[J. Chem. Phys. 114, 7655 (2001)]中,在基本的高斯链模型内被推导出来。整个链的聚合度以及各个嵌段的聚合度都是可自由调节的参数,从而能够精确地确定各种相的稳定区域。该模型忽略了缠结效应,这些效应对于两嵌段共聚物中有序结构的形成是无关紧要的,否则会不必要地增加系统的平衡时间。在与斜方晶胞形态的单元尺寸相称的盒子尺寸的系统中,在圆柱相和层状相之间再现了向错相。详细研究了向错相的稳定区域,并发现与平均场理论的预测一致。在靠近向错节点的链的两个嵌段中观察到了由于包装受挫而导致的回转半径增加。