Clasping system with rotational path of insertion. 2. Relation between mesio-distal distance of edentulous space and retentive force.

The rotational path of insertion differs substantially from the conventional path or perpendicular path of insertion. With a rotational path, one segment of the partial denture is seated first, then the remainder of it is rotated into position. One segment of this system is the rigid retentive component with a long occlusal rest and the other is the conventional clasp. This study examined the influence of mesio-distal distance of the edentulous space, the point of the displacing force, the undercut of rigid retentive component and the inclination of the abutment tooth on the retention of this system. The following results were obtained: 1) Retention of the denture was the lowest when a displacing force was applied at the conventional clasp part under the conditions of mesio-distal distances with edentulous spaces of 10, 20 and 30 mm, respectively. 3) Retention showed a tendency to decrease progressively as the proximal undercut on the rigid retentive component was changed to 2.0, 1.5, 1.0 and 0.5 mm, respectively. The values of the decreasing ratio of retentive forces were almost the same regardless of the mesio-distal distance of the edentulous space. 4) Retention of the denture was improved when a tilted tooth was used as an abutment tooth on the rigid retentive component side.