Departamento de Física e Ingeniería de Polímeros, Instituto de Ciencia y Tecnología de Polímeros, CSIC, Madrid, Spain.
J Phys Chem B. 2011 Mar 31;115(12):2850-6. doi: 10.1021/jp1115788. Epub 2011 Mar 9.
Differential scanning calorimetry (DSC) and time-resolved synchrotron X-ray diffraction have been used to investigate the dynamic crystallization behavior and crystalline structure of novel nanocomposites based on isotactic polypropylene (iPP) and molybdenum disulfide inorganic nanotubes (INT-MoS(2)). The influence of the INT-MoS(2) content and different cooling rates on the crystallization behavior has been studied. The crystallization exothermic peak shifted to higher temperature, and the overall crystallization time was reduced by increasing the INT-MoS(2). The dynamic crystallization kinetics was analyzed using the Ozawa-Avrami method, which was successful in describing the dynamic crystallization behavior of these new nanocomposites. On the other hand, study of the nucleation activity using the Dobreva method revealed that the INT-MoS(2) had an efficient nucleation effect on the monoclinic crystal form of iPP. Moreover, this effect was corroborated by the results of the crystallization activation energy, calculated using Kissinger and Takhor methods, which also confirmed the fact that the addition of INT-MoS(2) made the molecular chains easier to crystallize and increased the crystallization rate of iPP.
差示扫描量热法(DSC)和时间分辨同步加速器 X 射线衍射已被用于研究新型纳米复合材料的动态结晶行为和晶体结构,该纳米复合材料基于等规聚丙烯(iPP)和二硫化钼无机纳米管(INT-MoS2)。研究了 INT-MoS2 含量和不同冷却速率对结晶行为的影响。通过增加 INT-MoS2,结晶放热峰向高温移动,整体结晶时间缩短。使用 Ozawa-Avrami 方法对动力学结晶动力学进行了分析,该方法成功地描述了这些新型纳米复合材料的动态结晶行为。另一方面,使用 Dobreva 方法研究成核活性表明,INT-MoS2 对 iPP 的单斜晶型具有有效的成核作用。此外,这一效应得到了使用 Kissinger 和 Takhor 方法计算的结晶活化能的结果的证实,该方法也证实了添加 INT-MoS2 使得分子链更容易结晶并提高了 iPP 的结晶速率。