Hernández Mainet Luis Carlos, Cabrera Luis Ponce, Rodriguez Eugenio, Cruz Abel Fundora, Santana Guillermo, Menchaca Jorge Luis, Pérez-Tijerina Eduardo
Laboratory of Laser Technology, CICATA-IPN, Altamira, Tamaulipas, 89600, Mexico.
Nanoscale Res Lett. 2012 Jan 18;7(1):80. doi: 10.1186/1556-276X-7-80.
Size-selected TiN nanoclusters in the range of 4 to 20 nm have been produced by an ionized cluster beam, which combines a glow-discharge sputtering with an inert gas condensation technique. With this method, by controlling the experimental conditions, it was possible to produce nanoparticles with a high control in size. The size distribution of TiN nanoparticles was determined before deposition by mass spectroscopy and confirmed by atomic force microscopy. The size distribution was also analyzed using a high-resolution transmission electron micrograph. The photoluminescence [PL] spectra of TiN nanoparticles at different sizes were also experimentally investigated. We reported, for the first time, the strong visible luminescence of TiN nanoparticles on Si (111) wafer due to the reduced size. We also discussed the PL intensity as a function of the nanoparticle size distribution.
通过将辉光放电溅射与惰性气体冷凝技术相结合的离子团簇束,制备出了尺寸在4至20纳米范围内的尺寸选择氮化钛纳米团簇。使用这种方法,通过控制实验条件,可以高度精确地制备纳米颗粒。在沉积之前,通过质谱法确定氮化钛纳米颗粒的尺寸分布,并通过原子力显微镜进行确认。还使用高分辨率透射电子显微镜图像对尺寸分布进行了分析。还对不同尺寸的氮化钛纳米颗粒的光致发光(PL)光谱进行了实验研究。我们首次报道了由于尺寸减小,氮化钛纳米颗粒在硅(111)晶片上有强烈的可见光发光。我们还讨论了PL强度作为纳米颗粒尺寸分布的函数。