Department of Chemistry, Ferdowsi University of Mashhad, Mashhad, Iran.
Ultrason Sonochem. 2012 Sep;19(5):1070-8. doi: 10.1016/j.ultsonch.2012.01.009. Epub 2012 Feb 9.
A core-shell nanocomposite (CdS/TiO(2)) was synthesized at relatively low temperature (70°C) with small particle sizes (~11 nm). First, CdS nanoparticles were prepared by a combination of ultrasound and new micro-emulsion (O/W) without surfactant. Then the synthesized CdS was easily combined with TiO(2) under sonication. The formation of uniform surface layer of TiO(2) with depths of 0.75-1.1 nm on the CdS led to an increase of particle size. Ultrasonic irradiation can control the hydrolysis and condensation of titanium tetra-isopropoxide (TTIP) and the formation of TiO(2) shell around the CdS core. This technique avoids some of the problems that exist in conventional microemulsion synthesis such as the presence of different additives and calcinations. It was found that nanocomposite particles extend the optical absorption spectrum into the visible region in comparison with pure TiO(2) and pure CdS. In addition, a larger depth of TiO(2) led to a red-shift of the absorption band in nanocomposite. The characterization of nanocomposites has been studied by HRTEM, TEM, XRD, EDAX, BET and, UV-vis.
一种核壳纳米复合材料(CdS/TiO(2))在相对较低的温度(70°C)下合成,粒径较小(约 11nm)。首先,通过超声和新的微乳液(O/W)结合,在没有表面活性剂的情况下制备了 CdS 纳米颗粒。然后,合成的 CdS 很容易在超声作用下与 TiO(2)结合。CdS 上均匀的 TiO(2)表面层的形成深度为 0.75-1.1nm,导致粒径增大。超声辐射可以控制钛四异丙醇酯(TTIP)的水解和缩合以及 CdS 核周围 TiO(2)壳的形成。该技术避免了传统微乳液合成中存在的一些问题,例如存在不同的添加剂和煅烧。与纯 TiO(2)和纯 CdS 相比,发现纳米复合材料颗粒将光吸收光谱扩展到可见光区域。此外,TiO(2)的较大深度导致了吸收带在纳米复合材料中的红移。通过 HRTEM、TEM、XRD、EDAX、BET 和 UV-vis 对纳米复合材料进行了表征。