Suppr超能文献

圆柱形样品中湍流瑞利-贝纳德对流的热边界层剖面。

Thermal boundary layer profiles in turbulent Rayleigh-Bénard convection in a cylindrical sample.

作者信息

Stevens Richard J A M, Zhou Quan, Grossmann Siegfried, Verzicco Roberto, Xia Ke-Qing, Lohse Detlef

机构信息

Physics of Fluids Group, Department of Science and Technology and JM Burgers Center for Fluid Dynamics, University of Twente, PO Box 217, 7500 AE Enschede, The Netherlands.

出版信息

Phys Rev E Stat Nonlin Soft Matter Phys. 2012 Feb;85(2 Pt 2):027301. doi: 10.1103/PhysRevE.85.027301. Epub 2012 Feb 7.

Abstract

We numerically investigate the structures of the near-plate temperature profiles close to the bottom and top plates of turbulent Rayleigh-Bénard flow in a cylindrical sample at Rayleigh numbers Ra = 10(8) to Ra = 2 × 10(12) and Prandtl numbers Pr = 6.4 and Pr = 0.7 with the dynamical frame method [Zhou and Xia, Phys. Rev. Lett. 104, 104301 (2010)], thus extending previous results for quasi-two-dimensional systems to three-dimensional systems. The dynamical frame method shows that the measured temperature profiles in the spatially and temporally local frame are much closer to the temperature profile of a laminar, zero-pressure gradient boundary layer (BL) according to Pohlhausen than in the fixed reference frame. The deviation between the measured profiles in the dynamical reference frame and the laminar profiles increases with decreasing Pr, where the thermal BL is more exposed to the bulk fluctuations due to the thinner kinetic BL, and increasing Ra, where more plumes are passing the measurement location.

摘要

我们使用动力学框架方法[周和夏,《物理评论快报》104, 104301 (2010)],对圆柱形容器中瑞利数Ra = 10⁸至Ra = 2×10¹²、普朗特数Pr = 6.4和Pr = 0.7的湍流瑞利-贝纳德流靠近底部和顶部平板处的近平板温度分布结构进行了数值研究,从而将准二维系统的先前结果扩展到了三维系统。动力学框架方法表明,与固定参考系相比,在空间和时间局部框架中测量到的温度分布更接近根据波尔豪森理论的层流、零压力梯度边界层(BL)的温度分布。动力学参考系中测量分布与层流分布之间的偏差随着Pr的减小而增大,此时由于动力学BL较薄,热BL更容易受到主体涨落的影响;随着Ra的增大而增大,此时有更多羽流通过测量位置。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验