The Key Laboratory of Food Colloids and Biotechnology, Ministry of Education, School of Chemical and Material Engineering, Jiangnan University, Wuxi 214122, China.
J Chromatogr A. 2012 Jul 6;1245:190-8. doi: 10.1016/j.chroma.2012.05.030. Epub 2012 May 12.
A simple, green, and novel approach to prepare polymeric micelle with amphiphilic random copolymer P (MMA-co-MAA) via neutralization in aqueous medium has been developed, and the polymeric micelle was firstly applied as a pseudostationary phase (PSP) in electrokinetic chromatography (EKC) in the present work. Three structurally similar corticosteroids namely hydrocortisone, prednisolone, and prednisone were separated with EKC using polymeric micelle as PSP to assess the separation performance. The effects of polymeric concentration and pH on micellar microstructure including size, morphology, surface charge density and EKC performances have been investigated. TEM showed that amphiphilic random copolymers were self-assembled via neutralization to form micelles with well-defined size and shape. The size and shape of the micelle depended on the P (MMA-co-MAA) concentration and pH. At the concentration of 0.048 mM and pH 9.2, the polymeric micelles were of monodispersity and perfect spheres. DLS showed the size of micelle was almost equal as polymer concentration in the range of 0.0096-0.048 mM, and then enlarged sharply at the concentration larger than 0.048 mM. However, the zeta potentials of micelle were nearly unchanged. The polymer concentration is also the key parameter for EKC separation. Under the optimum conditions, three analytes could be baseline separated within 7.4 min. Compared with typical MEKC, MEEKC, and MEKC modified with IL ([Bmim]BF₄), the developed method was more rapid, efficient, and higher selective. The separation mechanism using polymeric micelle as PSP was reverse-phase interaction. The actual cosmetic samples were analyzed with recoveries between 97.3% and 113%.
一种简单、绿色、新颖的方法,通过在水介质中中和制备两亲性无规共聚物 P(MMA-co-MAA)形成聚合物胶束,本工作首次将聚合物胶束作为伪固定相(PSP)应用于胶束电动色谱(MEKC)中。使用聚合物胶束作为 PSP 以评估分离性能,将三种结构相似的皮质甾酮(即氢化可的松、泼尼松龙和泼尼松)在 MEKC 中进行分离。考察了聚合物浓度和 pH 值对胶束微结构(包括粒径、形态、表面电荷密度和 MEKC 性能)的影响。TEM 表明,两亲性无规共聚物通过中和自组装形成具有良好尺寸和形状的胶束。胶束的大小和形状取决于 P(MMA-co-MAA)浓度和 pH 值。在浓度为 0.048 mM 和 pH 9.2 时,聚合物胶束为单分散且为完美的球体。DLS 表明,在 0.0096-0.048 mM 范围内,胶束的粒径几乎与聚合物浓度相等,然后在大于 0.048 mM 的浓度下急剧增大。然而,胶束的动电电位几乎保持不变。聚合物浓度也是 MEKC 分离的关键参数。在最佳条件下,三种分析物可在 7.4 min 内实现基线分离。与典型的 MEKC、MEEKC 和 MEKC 改性离子液体([Bmim]BF₄)相比,该方法具有更快、更高效、更高选择性。使用聚合物胶束作为 PSP 的分离机制是反相相互作用。对实际化妆品样品进行了分析,回收率在 97.3%至 113%之间。