Warner J J, Caborn D N, Berger R, Fu F H, Seel M
Sports Medicine Institute, Department of Orthopaedic Surgery, University of Pittsburgh, Pittsburgh, Pa.
J Shoulder Elbow Surg. 1993 May;2(3):115-33. doi: 10.1016/S1058-2746(09)80048-7. Epub 2009 Feb 19.
Though many anatomic and biomechanical studies have been performed to elucidate capsuloligamentous anatomy of the glenohumeral joint, no previous studies have evaluated capsuloligamentous anatomy during rotator cuff contraction. The purpose of this study was to define and document the orientation and interrelationship between the glenohumeral ligaments during simulated rotator cuff contraction. Six fresh cadaveric shoulders were arthroscoped to document and grade ligamentous anatomy. The superior and middle glenohumeral ligaments and the anterior and posterior bands of the inferior glenohumeral ligament complex were labeled by an arthroscopicassisted technique with a linked metallic bead system. Shoulders were then placed onto an experimental apparatus that simulated rotator cuff function through computer-controlled servo-hydrolic actuators attached to the rotator cuff and biceps by a clamp and cable-and-pulley system. Simulated rotator cuff action and manual placement allowed shoulders to be placed into three positions of rotation (neutral, internal, and external) in three positions of scapular plane abduction (0°, 45°, 90°). Anteroposterior and axillary lateral plane radiographs were taken in each position to document orientation of all four ligaments. Both the superior and middle glenohumeral ligaments were maximally lengthened in 0° and 45° abduction and external rotation and appeared to shorten in all positions of abduction. The anterior and posterior bands of the inferior glenohumeral ligament complex maintained a cruciate orientation in all positions of abduction in the anteroposterior plane, except at 90° abduction and external rotation, where they are parallel. This cruciate orientation is due to the different location of the glenoid origin and humeral insertion of each band and may allow reciprocal tightening of each during rotation. The glenohumeral capsule is composed of discreet ligaments that undergo large charges in orientation during rotation. The superior and middle glenohumeral ligaments appear to complement the inferior glenohumeral ligaments, with the former tightening in adduction and the latter tightening in abduction. This relationship permits the large range of motion normally seen in the glenohumeral joint.
尽管已经进行了许多解剖学和生物力学研究来阐明盂肱关节的关节囊韧带解剖结构,但之前尚无研究评估肩袖收缩时的关节囊韧带解剖结构。本研究的目的是确定并记录模拟肩袖收缩时盂肱韧带之间的方向和相互关系。对六个新鲜尸体肩部进行关节镜检查,以记录和分级韧带解剖结构。通过关节镜辅助技术使用连接金属珠系统标记盂肱上韧带和中韧带以及盂肱下韧带复合体的前后带。然后将肩部放置在实验装置上,该装置通过夹钳和缆绳滑轮系统连接到肩袖和二头肌的计算机控制伺服液压致动器来模拟肩袖功能。模拟肩袖动作和手动放置使肩部能够在肩胛平面外展的三个位置(0°、45°、90°)进入三个旋转位置(中立、内旋和外旋)。在每个位置拍摄前后位和腋侧位X线片,以记录所有四条韧带的方向。盂肱上韧带和中韧带在0°和45°外展及外旋时均最大程度延长,并且在所有外展位置似乎都会缩短。盂肱下韧带复合体的前后带在前后平面的所有外展位置均保持十字形方向,但在90°外展和外旋时除外,此时它们是平行的。这种十字形方向是由于每条带的盂缘起点和肱骨止点位置不同,并且可能在旋转过程中允许彼此相互收紧。盂肱关节囊由离散的韧带组成,这些韧带在旋转过程中方向会发生很大变化。盂肱上韧带和中韧带似乎补充了盂肱下韧带,前者在内收时收紧,后者在外展时收紧。这种关系使得盂肱关节通常能够实现大范围的运动。