Department of Agronomy, Food, Natural Resources, Animals and Environment (DAFNAE), University of Padova, Legnaro (PD), Italy.
J Dairy Res. 2013 Feb;80(1):1-5. doi: 10.1017/S0022029912000453. Epub 2012 Sep 24.
The aim of this study was to assess the effect of chemical composition, coagulation properties, pH, and titratable acidity (TA, SH°/50 ml) of vat milk on Grana Padano cheese yield (CY) under field conditions. Twelve cheese-making sessions were carried out from February to December 2009 in a dairy cooperative of Grana Padano Consortium (Italy), for a total of 96 vats of milk processed. For each vat, samples of raw milk were collected and analysed for quality traits (fat, protein, and casein contents), pH, TA, and milk coagulation properties (MCP), measured as rennet coagulation time (RCT, min), curd-firming time (k(20), min), and curd firmness (a(30), mm). Cheese yield was expressed as kilograms of cheese per 100 kg milk transformed, and was measured after 2 d of drainage. Fat, protein, and casein contents were positively and strongly correlated with CY (coefficients of correlation, r = 0.72, 0.88, and 0.84, respectively; P < 0.001). Coagulation properties were moderately and significantly (P < 0.001) related to CY: milk that coagulated earlier and had stronger a(30) was associated to greater CY. Cheese yield was analysed with a model that accounted for fixed effects of cheese-making day, fat and protein content, TA, and a(30). Significance was found for all the effects (P < 0.05). Milk characterised by high values of a(30) resulted in higher CY than milk with low values of a 30, indicating that MCP could be used as indicators of cheese-making efficiency. Future research should investigate the relationships between MCP and quality of cheese, and explore the feasibility of including MCP in multiple component milk pricing system for Grana Padano cheese production.
本研究旨在评估大桶牛奶的化学成分、凝固特性、pH 值和可滴定酸度(以 SH°/50ml 计)对大桶牛奶在田间条件下生产格拉纳·帕达诺奶酪(Grana Padano cheese)产量(CY)的影响。2009 年 2 月至 12 月期间,在意大利格拉纳·帕达诺奶酪联盟(Grana Padano Consortium)的一家乳品合作社进行了 12 次奶酪制作,共处理了 96 桶牛奶。对于每桶牛奶,均采集了原料奶样品,用于分析质量特性(脂肪、蛋白质和酪蛋白含量)、pH 值、可滴定酸度(TA)和牛奶凝固特性(MCP),其中 MCP 包括凝乳酶凝固时间(RCT,min)、凝块形成时间(k(20),min)和凝块硬度(a(30),mm)。奶酪产量以每 100kg 转化牛奶的奶酪产量表示,在排水 2d 后进行测量。脂肪、蛋白质和酪蛋白含量与 CY 呈正相关且高度相关(相关系数 r 分别为 0.72、0.88 和 0.84,P<0.001)。凝固特性与 CY 呈中度显著相关(P<0.001):较早凝固和硬度较强的牛奶与较高的 CY 相关。使用考虑奶酪制作天数、脂肪和蛋白质含量、TA 和 a(30)的固定效应模型分析了奶酪产量。所有效应均具有统计学意义(P<0.05)。a(30)值较高的牛奶生产的 CY 高于 a(30)值较低的牛奶,表明 MCP 可用作奶酪制作效率的指标。未来的研究应探讨 MCP 与奶酪质量之间的关系,并探索将 MCP 纳入格拉纳·帕达诺奶酪生产的多组分牛奶定价系统的可行性。