Suppr超能文献

受限和剪切作用下二维胶体晶体的朗之万动力学模拟

Langevin dynamics simulations of a two-dimensional colloidal crystal under confinement and shear.

作者信息

Wilms D, Virnau P, Sengupta S, Binder K

机构信息

Institut für Physik, Johannes Gutenberg-Universität Mainz, Staudinger Weg 7, D-55099 Mainz, Germany.

出版信息

Phys Rev E Stat Nonlin Soft Matter Phys. 2012 Jun;85(6 Pt 1):061406. doi: 10.1103/PhysRevE.85.061406. Epub 2012 Jun 18.

Abstract

Langevin dynamics simulations are used to study the effect of shear on a two-dimensional colloidal crystal (with implicit solvent) confined by structured parallel walls. When walls are sheared very slowly, only two or three crystalline layers next to the walls move along with them, while the inner layers of the crystal are only slightly tilted. At higher shear velocities, this inner part of the crystal breaks into several pieces with different orientations. The velocity profile across the slit is reminiscent of shear banding in flowing soft materials, where liquid and solid regions coexist; the difference, however, is that in the latter case the solid regions are glassy while here they are crystalline. At even higher shear velocities, the effect of the shearing becomes smaller again. Also the effective temperature near the walls (deduced from the velocity distributions of the particles) decreases again when the wall velocity gets very large. When the walls are placed closer together, thereby introducing an incommensurability between the periodicity of the confined crystal and the walls, a structure containing a soliton staircase arises in simulations without shear. Introducing shear increases the disorder in these systems until no solitons are visible anymore. Instead, similar structures like in the case without mismatch result. At high shear rates, configurations where the incommensurability of the crystalline structure is compensated by the creation of holes become relevant.

摘要

朗之万动力学模拟用于研究剪切对由结构化平行壁限制的二维胶体晶体(含隐式溶剂)的影响。当壁以非常缓慢的速度剪切时,壁旁只有两三层晶体层会随壁一起移动,而晶体的内层仅略有倾斜。在较高的剪切速度下,晶体的内部会分裂成几个具有不同取向的碎片。狭缝中的速度分布让人联想到流动软材料中的剪切带,其中液体和固体区域共存;然而,不同之处在于,在后一种情况下,固体区域是玻璃态的,而这里它们是晶态的。在更高的剪切速度下,剪切的影响又会变小。当壁速度变得非常大时,壁附近的有效温度(由粒子的速度分布推导得出)也会再次降低。当壁放置得更近时,从而在受限晶体的周期性与壁之间引入不匹配,在无剪切的模拟中会出现包含孤子阶梯的结构。引入剪切会增加这些系统中的无序度,直到不再能看到孤子。相反,会出现与无失配情况类似的结构。在高剪切速率下,通过产生孔洞来补偿晶体结构不匹配的构型变得很重要。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验