State Key Laboratory of Organic Geochemistry, Guangdong Key Laboratory of Environmental Resources Utilization and Protection, Guangzhou Institute of Geochemistry, Chinese Academy of Sciences, Guangzhou 510640, China.
ACS Appl Mater Interfaces. 2012 Nov;4(11):5988-96. doi: 10.1021/am3016476. Epub 2012 Nov 12.
The carbon nanotube (CNT)-sub-micrometer-sized anatase TiO₂ sphere composite photocatalysts were synthesized by a facile one-step hydrothermal method using titanium tetrafluoride as titanium source and CNTs as structure regulator. Various technologies including X-ray diffraction, UV-visible absorption spectra, N₂ adsorption-desorption, scanning electron microscopy, and transmission electron microscopy were employed to characterize the structure properties of the prepared composite photocatalysts. The results indicated that the composite photocatalysts consisted of CNTs wrapping around the sub-micrometer-sized anatase TiO₂ spheres with controllable crystal facets and that the aggregated particles with average diameter ranged from 200 to 600 nm. The fabricated composite photocatalysts were used to degrade gaseous styrene in this work. As expected, a synergistic effect that remarkably enhancing the photocatalytic degradation efficiency of gaseous styrene by the prepared composite photocatalysts was observed in comparison with that the degradation efficiency using pure anatase TiO₂ and the adsorption of CNTs. Similar results were also confirmed in the decolorization of liquid methyl orange. Further investigation demonstrated that the synergistic effect in the photocatalytic activity was related to the structure of the sub-micrometer-sized anatase TiO₂ spheres and the significant roles of CNTs in the composite photocatalysts. By controlling the content of CNTs, the content of TiO₂ or the temperature during the hydrothermal synthesis process, anatase TiO₂ spheres with controllable crystallite size and dominant crystal facets such as {001}, {101}, or polycrystalline could be obtained, which was beneficial for the increase in the synergistic effect and further enhancement of the photocatalytic efficiencies.
碳纳米管(CNT)亚微米级锐钛矿 TiO₂ 球复合光催化剂通过一步水热法,以四氟化钛为钛源,CNT 为结构调节剂合成。采用 X 射线衍射、紫外-可见吸收光谱、N₂吸附-脱附、扫描电子显微镜和透射电子显微镜等多种技术对制备的复合光催化剂的结构性能进行了表征。结果表明,复合光催化剂由 CNT 包裹在亚微米级锐钛矿 TiO₂ 球上组成,具有可控的晶体面,平均粒径为 200-600nm 的团聚颗粒。在这项工作中,制备的复合光催化剂用于降解气态苯乙烯。正如预期的那样,与纯锐钛矿 TiO₂ 的降解效率和 CNTs 的吸附相比,所制备的复合光催化剂显著增强了气态苯乙烯的光催化降解效率,观察到协同效应。在液体甲基橙的脱色中也得到了类似的结果。进一步的研究表明,光催化活性中的协同效应与亚微米级锐钛矿 TiO₂ 球的结构以及 CNTs 在复合光催化剂中的重要作用有关。通过控制 CNTs 的含量、TiO₂ 的含量或水热合成过程中的温度,可以获得具有可控晶粒尺寸和优势晶面(如{001}、{101}或多晶)的锐钛矿 TiO₂ 球,这有利于协同效应的增加和光催化效率的进一步提高。