PGM Group, Chemical Resource Beneficiation (CRB) Research Focus Area, North-West University, Private Bag X6001, Potchefstroom 2520, South Africa.
Phys Chem Chem Phys. 2012 Dec 28;14(48):16760-9. doi: 10.1039/c2cp42683h. Epub 2012 Nov 13.
A new crystalline organic-inorganic nano-composite nylon-6,6 nickel phosphate membrane was synthesised subsequent to which (a) the physico-chemical characteristics of the membrane were evaluated employing FTIR, SEM, EDX, TEM, XRD and porosity measurements, and (b) membrane potential measurements were conducted employing different concentrations (0.0001 ≤c (M) ≤ 1) of KCl, NaCl and LiCl 1:1 electrolyte solutions. The Teorell, Meyer and Sievers (TMS) theoretical method was employed for evaluating the charge density of the synthesised membranes, and the observed data were utilised to calculate membrane potentials using the extended TMS theory. Charge density for 1:1 electrolyte solutions was found to decrease in the order KCl > NaCl > LiCl, which is in accordance with a decrease in the size of the cation. The synthesised membrane was found to be cation-selective with the measured membrane potentials found to be positive in all instances, decreasing in the order LiCl > NaCl > KCl, which is in accordance with an increase in the size of the cation for the chosen electrolytes. Observed potential data were used to calculate the transference numbers, mobilities, distribution coefficients, and charge effectiveness of ions and the theoretically calculated potential values were found to be in good agreement with the experimentally observed values.
一种新型的结晶型有机-无机纳米复合尼龙-6,6 磷酸镍膜被合成,然后(a)通过傅里叶变换红外光谱(FTIR)、扫描电子显微镜(SEM)、能谱分析(EDX)、透射电子显微镜(TEM)、X 射线衍射(XRD)和孔隙率测量来评估膜的物理化学特性,以及(b)通过使用不同浓度(0.0001 ≤ c (M) ≤ 1)的 KCl、NaCl 和 LiCl 1:1 电解质溶液进行膜电位测量。采用 Teorell、Meyer 和 Sievers(TMS)理论方法来评估合成膜的电荷密度,并用扩展的 TMS 理论来计算观察到的数据的膜电位。发现 1:1 电解质溶液的电荷密度按 KCl > NaCl > LiCl 的顺序降低,这与阳离子的尺寸减小相符。所合成的膜是阳离子选择性的,所有情况下测量到的膜电位均为正,按 LiCl > NaCl > KCl 的顺序减小,这与所选电解质中阳离子尺寸的增加相符。观察到的电位数据用于计算离子的迁移数、迁移率、分配系数和电荷效率,并且理论计算的电位值与实验观察到的值吻合良好。