Bækgaard N, Broholm R, Just S
Vascular Clinic, Gentofte Hospital and Rigshospitalet, Niels Andersensvej 65, DK-2900 Hellerup, Copenhagen, Denmark.
Phlebology. 2013 Mar;28 Suppl 1:112-6. doi: 10.1177/0268355513476818.
The most important vein segment to thrombolyse after deep venous thrombosis (DVT) is the outflow tract meaning the iliofemoral vein. Iliofemoral DVT is defined as DVT in the iliac vein and the common femoral vein. Spontaneous recanalization is less than 50%, particularly on the left side. The compression from adjacent structures, predominantly on the left side is known as the iliac vein compression syndrome. Therefore, it is essential that supplementary endovenous procedures have to be performed in case of persistent obstructive lesions following catheter-directed thrombolysis. Insertion of a stent in this position is the treatment of choice facilitating the venous flow into an unobstructed outflow tract either from the femoral vein or the deep femoral vein or both. The stent, made of stainless steel or nitinol, has to be self-expandable and flexible with radial force to overcome the challenges in this low-pressure system. The characteristics of the anatomy with external compression and often a curved vein segment with diameter difference make stent placement necessary. Ballooning alone has no place in this area. The proportion of inserted stents varies in the published materials with catheter-directed thrombolysis of iliofemoral deep venous thrombosis.
深静脉血栓形成(DVT)后进行溶栓治疗最重要的静脉段是流出道,即髂股静脉。髂股静脉血栓形成被定义为髂静脉和股总静脉的血栓形成。自发再通率低于50%,尤其是左侧。来自相邻结构的压迫,主要是左侧,被称为髂静脉压迫综合征。因此,在导管定向溶栓后出现持续性阻塞性病变的情况下,必须进行辅助性静脉内操作。在此位置插入支架是首选治疗方法,可促进静脉血从股静脉或股深静脉或两者流入通畅的流出道。由不锈钢或镍钛合金制成的支架必须是自膨胀的且具有径向力的柔韧性,以克服这个低压系统中的挑战。外部压迫以及常有直径差异的弯曲静脉段的解剖结构特点使得支架置入成为必要。单纯球囊扩张在这个领域没有用。在已发表的关于髂股深静脉血栓形成导管定向溶栓的材料中,置入支架的比例各不相同。