Suppr超能文献

提取过程对琼脂流变学和结构性质的影响。

Influence of the extraction process on the rheological and structural properties of agars.

机构信息

REQUIMTE, Faculdade de Engenharia, Universidade do Porto, Rua Dr. Roberto Frias, 4200-465 Porto, Portugal.

出版信息

Carbohydr Polym. 2013 Jul 1;96(1):163-71. doi: 10.1016/j.carbpol.2013.03.070. Epub 2013 Mar 29.

Abstract

Agars obtained by traditional hot-water (TWE) and microwave-assisted (MAE) extractions were compared in terms of their rheological and physicochemical properties and molecular self-association in solutions of low (0.05%, w/w) and high (1.5%, w/w) polymer concentrations. At low concentration, thin gelled layers were imaged by AFM. Slow or rapid cooling of the solutions influenced structure formation. In each case, TWE and MAE agar structures were different and apparently larger for MAE. At high concentration, progressive structural reinforcement was seen; while TWE agar showed a more open and irregular 3D network, MAE agar gel imaged by cryoSEM was denser and fairly uniform. The rheological (higher thermal stability and consistency) and mechanical (higher gel strength) behaviors of MAE agar seemed consistent with a positive effect of molecular mass and 3,6-anhydro-α-l-galactose content. MAE produced non-degraded agar comparable with commercial ones and if properly monitored, could be a promising alternative to TWE.

摘要

对比了传统热水提取(TWE)和微波辅助提取(MAE)获得的琼脂,在低(0.05%,w/w)和高(1.5%,w/w)聚合物浓度溶液中的流变性和物理化学性质以及分子自组装方面。在低浓度下,通过 AFM 对薄凝胶层进行成像。溶液的缓慢或快速冷却会影响结构形成。在每种情况下,TWE 和 MAE 琼脂的结构都不同,MAE 的结构显然更大。在高浓度下,观察到结构逐渐增强;虽然 TWE 琼脂显示出更开放和不规则的 3D 网络,但 cryoSEM 成像的 MAE 琼脂凝胶更密集且相当均匀。MAE 琼脂的流变学(更高的热稳定性和一致性)和力学(更高的凝胶强度)行为似乎与其分子量和 3,6-脱水-α-l-半乳糖含量的积极影响一致。MAE 生产的非降解琼脂与商业琼脂相当,如果得到适当的监测,可能是 TWE 的有前途的替代品。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验