Flinders Centre for Nanoscale Science & Technology, School of Chemical and Physical Sciences, Flinders University, Sturt Road, Bedford Park, Adelaide 5042, SA, Australia.
School of Chemical and Physical Sciences, Flinders University, Sturt Road, Bedford Park, Adelaide 5042, SA, Australia.
J Hazard Mater. 2014 May 30;273:174-82. doi: 10.1016/j.jhazmat.2014.03.048. Epub 2014 Mar 29.
Herein, for the first time, natural clinoptilolite-rich zeolite powders modified with a bio-inspired adhesive, polydopamine (PDA), have been systematically studied as an adsorbent for copper cations (Cu(II)) from aqueous solution. Fourier transform infrared (FTIR) spectroscopy, X-ray photoelectron spectroscopy (XPS) and thermogravimetric analysis (TGA) revealed successful grafting of PDA onto the zeolite surface. The effects of pH (2-5.5), PDA treatment time (3-24h), contact time (0 to 24h) and initial Cu(II) ion concentrations (1 to 500mgdm(-3)) on the adsorption of Cu(II) ions were studied using atomic absorption spectroscopy (AAS) and neutron activation analysis (NAA). The adsorption behavior was fitted to a Langmuir isotherm and shown to follow a pseudo-second-order reaction model. The maximum adsorption capacities of Cu(II) were shown to be 14.93mgg(-1) for pristine natural zeolite and 28.58mgg(-1) for PDA treated zeolite powders. This impressive 91.4% increase in Cu(II) ion adsorption capacity is attributed to the chelating ability of the PDA on the zeolite surface. Furthermore studies of recyclability using NAA showed that over 50% of the adsorbed copper could be removed in mild concentrations (0.01M or 0.1M) of either acid or base.
本文首次系统地研究了用生物启发型黏合剂聚多巴胺(PDA)修饰的天然沸石粉作为吸附剂,从水溶液中吸附铜离子(Cu(II))。傅里叶变换红外(FTIR)光谱、X 射线光电子能谱(XPS)和热重分析(TGA)表明 PDA 成功接枝到沸石表面。采用原子吸收光谱(AAS)和中子活化分析(NAA)研究了 pH(2-5.5)、PDA 处理时间(3-24 小时)、接触时间(0-24 小时)和初始 Cu(II)离子浓度(1-500mgdm(-3))对 Cu(II)离子吸附的影响。吸附行为符合 Langmuir 等温线,并遵循准二级反应模型。原始天然沸石的最大 Cu(II)吸附容量为 14.93mgg(-1),而 PDA 处理的沸石粉末的最大吸附容量为 28.58mgg(-1)。Cu(II)离子吸附容量惊人地提高了 91.4%,这归因于 PDA 在沸石表面的螯合能力。此外,使用 NAA 进行的可回收性研究表明,在温和浓度(0.01M 或 0.1M)的酸或碱中,可以去除超过 50%的吸附铜。