Pandey Suresh K, Kaur Jasmeet, Easwaramoorthy Balu, Shah Ankur, Coleman Robert, Mukherjee Jogeshwar
Mol Imaging. 2014;13:1-7.
Our goal is to develop multimodality imaging agents for use in cell tracking studies by positron emission tomography (PET) and optical imaging (OI). For this purpose, bovine serum albumin (BSA) was complexed with biotin (histologic studies), 5(6)-carboxyfluorescein, succinimidyl ester (FAM SE) (OI studies), and diethylenetriamine pentaacetic acid (DTPA) for chelating gallium 68 (PET studies). For synthesis of BSA-biotin-FAM-DTPA, BSA was coupled to (+)-biotin N-hydroxysuccinimide ester (biotin-NHSI). BSA-biotin was treated with DTPA-anhydride and biotin-BSA-DTPA was reacted with FAM. The biotin-BSA-DTPA-FAM was reacted with gallium chloride 3 to 5 mCi eluted from the generator using 0.1 N HCl and was passed through basic resin (AG 11 A8) and 150 μCi (100 μL, pH 7-8) was incubated with 0.1 mg of FAM conjugate (100 μL) at room temperature for 15 minutes to give 68Ga-BSA-biotin-DTPA-FAM. A shaved C57 black mouse was injected with FAM conjugate (50 μL) at one flank and FAM-68Ga (50 μL, 30 μCi) at the other. Immediately after injection, the mouse was placed in a fluorescence imaging system (Kodak In-Vivo F, Bruker Biospin Co., Woodbridge, CT) and imaged (λex: 465 nm, λem: 535 nm, time: 8 seconds, Xenon Light Source, Kodak). The same mouse was then placed under an Inveon microPET scanner (Siemens Medical Solutions, Knoxville, TN) injected (intravenously) with 25 μCi of 18F and after a half-hour (to allow sufficient bone uptake) was imaged for 30 minutes. Molecular weight determined using matrix-associated laser desorption ionization (MALDI) for the BSA sample was 66,485 Da and for biotin-BSA was 67,116 Da, indicating two biotin moieties per BSA molecule; for biotin-BSA-DTPA was 81,584 Da, indicating an average of 30 DTPA moieties per BSA molecule; and for FAM conjugate was 82,383 Da, indicating an average of 1.7 fluorescent moieties per BSA molecule. Fluorescence imaging clearly showed localization of FAM conjugate and FAM-68Ga at respective flanks of the mouse, whereas only a hot spot at the expected flank (FAM-68Ga injection site) was observed in microPET imaging. Our results suggest that BSA-biotin-DTPA-FAM may function as a multiprobe for PET and fluorescence imaging. Experiments are currently in progress to demonstrate cell tracking using both optical and nuclear imaging.
我们的目标是开发用于正电子发射断层扫描(PET)和光学成像(OI)细胞追踪研究的多模态成像剂。为此,牛血清白蛋白(BSA)与生物素(组织学研究)、5(6)-羧基荧光素琥珀酰亚胺酯(FAM SE)(OI研究)和二乙三胺五乙酸(DTPA)络合以螯合镓68(PET研究)。为了合成BSA-生物素-FAM-DTPA,将BSA与(+)-生物素N-羟基琥珀酰亚胺酯(生物素-NHSI)偶联。用DTPA-酸酐处理BSA-生物素,使生物素-BSA-DTPA与FAM反应。将生物素-BSA-DTPA-FAM与用0.1 N HCl从发生器洗脱的3至5 mCi氯化镓反应,然后通过碱性树脂(AG 11 A8),并将150 μCi(100 μL,pH 7-8)在室温下与0.1 mg FAM缀合物(100 μL)孵育15分钟,得到68Ga-BSA-生物素-DTPA-FAM。给一只剃毛的C57黑色小鼠一侧腹注射FAM缀合物(50 μL),另一侧腹注射FAM-68Ga(50 μL,30 μCi)。注射后立即将小鼠置于荧光成像系统(柯达In-Vivo F,布鲁克生物自旋公司,伍德布里奇,康涅狄格州)中成像(激发波长:465 nm,发射波长:535 nm,时间:8秒,氙光源,柯达)。然后将同一只小鼠置于Inveon微型PET扫描仪(西门子医疗解决方案公司,诺克斯维尔,田纳西州)下,静脉注射25 μCi的18F,半小时后(以使骨骼有足够的摄取)成像30分钟。使用基质辅助激光解吸电离(MALDI)测定的BSA样品分子量为66,485 Da,生物素-BSA为67,116 Da,表明每个BSA分子有两个生物素部分;生物素-BSA-DTPA为81,584 Da,表明每个BSA分子平均有30个DTPA部分;FAM缀合物为82,383 Da,表明每个BSA分子平均有1.7个荧光部分。荧光成像清楚地显示了FAM缀合物和FAM-68Ga在小鼠相应侧腹的定位,而在微型PET成像中仅在预期的侧腹(FAM-68Ga注射部位)观察到一个热点。我们的结果表明,BSA-生物素-DTPA-FAM可能作为PET和荧光成像的多探针发挥作用。目前正在进行实验以证明使用光学和核成像进行细胞追踪。